|
Rozmiar: 17564
Komentarz: użycie highlight, dodanie pobranie certyfikatu dla repozytorium
|
Rozmiar: 30416
Komentarz: * aktualizacja 2016.08.21: uruchomienie poudriere w jail; aktualizacje po upgrade serwera; rozbudowa plików konfiguracyjnych
|
| Usunięcia zostały oznaczone w ten sposób. | Dodatki zostały oznaczone w ten sposób. |
| Linia 7: | Linia 7: |
| Ten przepis dotyczy [[UruchomienieJails|uruchomienia]] własnego jaila z podriere w celu budowania paczek dla pozostałych jail-i. Niemniej niektóre ogólne rzeczy są przydatne również dla serwerów bez jail-i. |
Ten przepis dotyczy [[UruchomienieJails|uruchomienia]] własnego jaila z poudriere w celu budowania paczek dla pozostałych jail-i. Niemniej niektóre ogólne rzeczy są przydatne również dla serwerów bez jail-i. = Konfiguracja poudriere jail inside = == Konfiguracja zfs na potrzeby poudriere w jail == {{{#!highlight bash numbers=off zfs create -o jailed=on -o mountpoint=/usr/jails/pkg.wtp3.local sys/data/u/jails/pkg.wtp3.local zfs create -o jailed=on -o canmount=on -o mountpoint=/pkg sys/data/pkg zfs create -p -o poudriere:type=data -o atime=off -o mountpoint=/pkg/data sys/data/pkg/data zfs create -o exec=on sys/data/pkg/data/.m zfs create -o compression=off sys/data/pkg/data/cache zfs create -o compression=lz4 sys/data/pkg/data/logs zfs create -o compression=off sys/data/pkg/data/packages zfs create -o compression=off sys/data/pkg/data/wrkdirs zfs create -p -o compression=lz4 -o atime=off -o mountpoint=/pkg/ports/default sys/data/pkg/ports/default }}} == /etc/fstab == {{{ # --- JAILS --------------------------------------------------------------------------- # sys/data/u/jails/pkg.wtp3.local /usr/jails/pkg.wtp3.local zfs rw,noatime,nfsv4acls 0 0 # --- Dodatki do JAILS ----------------------------------------------------------------- # sys/data/pkg /usr/jails/pkg.wtp3.local/pkg zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/data /usr/jails/pkg.wtp3.local/pkg/data zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/data/.m /usr/jails/pkg.wtp3.local/pkg/data/.m zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/data/cache /usr/jails/pkg.wtp3.local/pkg/data/cache zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/data/logs /usr/jails/pkg.wtp3.local/pkg/data/logs zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/data/packages /usr/jails/pkg.wtp3.local/pkg/data/packages zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/data/wrkdirs /usr/jails/pkg.wtp3.local/pkg/data/wrkdirs zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/jails /usr/jails/pkg.wtp3.local/pkg/jails zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/ports /usr/jails/pkg.wtp3.local/pkg/ports zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/ports/default /usr/jails/pkg.wtp3.local/pkg/ports/default zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 /usr/src /usr/jails/pkg.wtp3.local/usr/src nullfs ro,late 0 0 /usr/obj /usr/jails/pkg.wtp3.local/usr/obj nullfs ro,late 0 0 }}} Zamontowanie katalogów `/usr/src` oraz `/usr/obj` potrzebne w celu wykonania jaila ze źródeł systemu (własna konfiguracja) {{{#!wiki comment |
| Linia 11: | Linia 50: |
| }}} == Konfiguracja /etc/jail.conf == {{{ pkg_wtp3_local { host.hostname = "pkg.stenda.jails"; path = "/usr/jails/pkg.wtp3.local"; ip4.addr += "10.20.11.32/32"; ip4.addr += "127.0.0.1/32"; allow.raw_sockets = 0; exec.clean; exec.consolelog = "/var/log/jails/pkg.wtp3.local_console.log"; mount += "procfs /usr/jails/pkg.wtp3.local/proc procfs rw 0 0"; allow.set_hostname = 0; persist; children.max=10; allow.mount; allow.mount.tmpfs; allow.mount.devfs; allow.mount.procfs; allow.mount.zfs; allow.mount.nullfs; allow.raw_sockets; allow.socket_af; allow.sysvipc; allow.chflags; enforce_statfs=1; ip6=inherit; ip4=inherit; } }}} /!\ '''WAŻNE''' poudriere wymaga, aby interfejs ''lo0'' posiadała adres ''127.0.0.1''. W przeciwnym przypadku nie ma możliwości uruchomienia budowania paczek. == Utworzenie brakujących katalogów == Poprzez konsolę jaila należy utworzyć brakujące katalogi: {{{#!highlight bash numbers=off mkdir -p /var/cache/ccache /var/cache/distfiles }}} == Załadowanie potrzebnych modułów jądra == Ręcznie w celu pierwszego uruchomienia: {{{#!highlight bash numbers=off kldload tmpfs }}} W pliku `/boot/loader.conf` w celu uruchomienia przy uruchamianiu serwera: {{{#!highlight bash numbers=off # TMPFS na potrzeby poudriere # tmpfs_load="YES" }}} = Instalacja oraz konfiguracja poudriere = |
|
| Linia 18: | Linia 110: |
=== Wersja dla jail === |
|
| Linia 19: | Linia 113: |
| --- poudriere.conf.sample 2015-04-11 04:30:18.000000000 +0000 +++ poudriere.conf 2015-05-30 21:01:21.732467588 +0000 @@ -9,14 +9,14 @@ |
--- poudriere.conf.sample 2016-08-14 01:59:19.000000000 +0200 +++ poudriere.conf 2016-08-17 23:56:33.541134000 +0200 @@ -9,7 +9,7 @@ |
| Linia 26: | Linia 120: |
| +ZPOOL=sys | +ZPOOL=sys/data |
| Linia 30: | Linia 124: |
| #NO_ZFS=yes # root of the poudriere zfs filesystem, by default /poudriere -# ZROOTFS=/poudriere +ZROOTFS=/data/pkg # the host where to download sets for the jails setup # You can specify here a host or an IP @@ -26,7 +26,7 @@ |
@@ -26,17 +26,16 @@ |
| Linia 42: | Linia 128: |
| -# Suggested: https://download.FreeBSD.org | |
| Linia 46: | Linia 133: |
| # RESOLV_CONF to a file on your hosts system that will be copied has @@ -35,13 +35,13 @@ |
-# RESOLV_CONF to a file on your hosts system that will be copied has +# REVOLV_CONF to a file on your hosts system that will be copied has # /etc/resolv.conf for the jail, except if you don't need it (using an http # proxy for example) |
| Linia 56: | Linia 145: |
| # ${BASEFS}/data # -#POUDRIERE_DATA=${BASEFS}/data +POUDRIERE_DATA=${BASEFS}/data # Use portlint to check ports sanity USE_PORTLINT=no @@ -52,7 +52,7 @@ # more mature and can have its memory usage capped. |
@@ -49,8 +48,8 @@ USE_PORTLINT=no # When building packages, a memory device can be used to speedup the build. # Only one of MFSSIZE or USE_TMPFS is supported. TMPFS is generally faster -# and will expand to the needed amount of RAM. MFS is a slower since it -# uses UFS and several abstraction layers. +# and will expand to the needed amount of RAM. MFS is a bit slower, but is +# more mature and can have its memory usage capped. |
| Linia 67: | Linia 155: |
| -#MFSSIZE=4G +MFSSIZE=2G # Use tmpfs(5) # This can be a space-separated list of options: @@ -62,7 +62,7 @@ # all - Run the entire build in memory, including builder jails. # yes - Only enables tmpfs(5) for wrkdir # EXAMPLE: USE_TMPFS="wrkdir data" -USE_TMPFS=yes +##USE_TMPFS=yes # How much memory to limit tmpfs size to for *each builder* in GiB # (default: none) @@ -70,7 +70,7 @@ |
#MFSSIZE=4G @@ -71,17 +70,21 @@ USE_TMPFS=yes |
| Linia 86: | Linia 161: |
| +MAX_MEMORY=3 | +MAX_MEMORY=2 |
| Linia 90: | Linia 165: |
| @@ -84,7 +84,7 @@ # mirror (default: svn0.us-west.FreeBSD.org) |
-DISTFILES_CACHE=/usr/ports/distfiles +DISTFILES_CACHE=/var/cache/distfiles + +# If set the ports or source tree marked to use csup method will use the defined mirror +# Note: csup is deprecated. Use svn instead. +#CSUP_HOST=cvsup._CHANGE_THIS_.freebsd.org # If set the ports tree or source tree marked to use svn will use the defined -# mirror (default: svn.FreeBSD.org) +# mirror (default: svn0.us-west.FreeBSD.org) |
| Linia 94: | Linia 177: |
| -#SVN_HOST=svn0.us-west.FreeBSD.org | -#SVN_HOST=svn.FreeBSD.org |
| Linia 99: | Linia 182: |
| @@ -92,7 +92,7 @@ | @@ -89,7 +92,7 @@ DISTFILES_CACHE=/usr/ports/distfiles |
| Linia 108: | Linia 191: |
| @@ -101,16 +101,16 @@ | @@ -98,16 +101,16 @@ DISTFILES_CACHE=/usr/ports/distfiles |
| Linia 118: | Linia 201: |
| +PKG_REPO_SIGNING_KEY=/usr/local/etc/pki/poudriere/poudriere.key | +PKG_REPO_SIGNING_KEY=/usr/local/etc/ssl/poudriere/pkg.bsdserwis.com.key |
| Linia 128: | Linia 211: |
| @@ -120,11 +120,11 @@ | @@ -117,11 +120,11 @@ DISTFILES_CACHE=/usr/ports/distfiles |
| Linia 138: | Linia 221: |
| +PREPARE_PARALLEL_JOBS=2 | +PREPARE_PARALLEL_JOBS=1 |
| Linia 142: | Linia 225: |
| @@ -129,10 +132,10 @@ DISTFILES_CACHE=/usr/ports/distfiles # Choose the default format for the workdir packing: could be tar,tgz,tbz,txz # default is tbz -# WRKDIR_ARCHIVE_FORMAT=tbz +WRKDIR_ARCHIVE_FORMAT=tar # Disable linux support -# NOLINUX=yes +NOLINUX=yes # By default poudriere sets FORCE_PACKAGE # To disable it (useful when building public packages): @@ -160,21 +163,21 @@ DISTFILES_CACHE=/usr/ports/distfiles # Timestamp every line of build logs # Default: no -#TIMESTAMP_LOGS=no +TIMESTAMP_LOGS=yes # URL where your POUDRIERE_DATA/logs are hosted # This will be used for giving URL hints to the HTML output when # scheduling and starting builds -#URL_BASE=http://yourdomain.com/poudriere/ +URL_BASE=https://pkg.wtp3.local/poudriere/ # This defines the max time (in seconds) that a command may run for a build # before it is killed for taking too long. Default: 86400 -#MAX_EXECUTION_TIME=86400 +MAX_EXECUTION_TIME=86400 # This defines the time (in seconds) before a command is considered to # be in a runaway state for having no output on stdout. Default: 7200 -#NOHANG_TIME=7200 +NOHANG_TIME=7200 # The repository is updated atomically if set yes. This leaves the @@ -233,11 +236,11 @@ DISTFILES_CACHE=/usr/ports/distfiles # Define format for build duration times # Default: %H:%M:%S -#DURATION_FORMAT="%H:%M:%S" +DURATION_FORMAT="%H:%M:%S" # Use colors when in a TTY # Default: yes -#USE_COLORS=yes +USE_COLORS=yes # Only build what is requested. Do not rebuild build deps if nothing requested # depends on them. This can create an inconsistent repository if you often }}} === Wersja bez jail === {{{#!highlight diff numbers=off --- poudriere.conf.sample 2016-07-01 01:50:31.000000000 +0200 +++ poudriere.conf 2016-06-28 02:21:49.699957000 +0200 @@ -9,7 +9,7 @@ # You need at least 7GB of free space in this pool to have a working # poudriere. # -#ZPOOL=tank +ZPOOL=tank ### NO ZFS # To not use ZFS, define NO_ZFS=yes @@ -26,17 +26,16 @@ # # Also note that every protocols supported by fetch(1) are supported here, even # file:/// -# Suggested: https://download.FreeBSD.org -FREEBSD_HOST=_PROTO_://_CHANGE_THIS_ +FREEBSD_HOST=http://ftp.freebsd.org # By default the jails have no /etc/resolv.conf, you will need to set -# RESOLV_CONF to a file on your hosts system that will be copied has +# REVOLV_CONF to a file on your hosts system that will be copied has # /etc/resolv.conf for the jail, except if you don't need it (using an http # proxy for example) RESOLV_CONF=/etc/resolv.conf # The directory where poudriere will store jails and ports -BASEFS=/usr/local/poudriere +BASEFS=/opt/poudriere # The directory where the jail will store the packages and logs # by default a zfs filesystem will be created and set to @@ -49,8 +48,8 @@ USE_PORTLINT=no # When building packages, a memory device can be used to speedup the build. # Only one of MFSSIZE or USE_TMPFS is supported. TMPFS is generally faster -# and will expand to the needed amount of RAM. MFS is a slower since it -# uses UFS and several abstraction layers. +# and will expand to the needed amount of RAM. MFS is a bit slower, but is +# more mature and can have its memory usage capped. # If set WRKDIRPREFIX will be mdmfs of the given size (mM or gG) #MFSSIZE=4G @@ -77,11 +76,15 @@ USE_TMPFS=yes # This allows to share the distfiles between jails and ports tree DISTFILES_CACHE=/usr/ports/distfiles +# If set the ports or source tree marked to use csup method will use the defined mirror +# Note: csup is deprecated. Use svn instead. +#CSUP_HOST=cvsup._CHANGE_THIS_.freebsd.org + # If set the ports tree or source tree marked to use svn will use the defined -# mirror (default: svn.FreeBSD.org) +# mirror (default: svn0.us-west.FreeBSD.org) # The full mirror list is available here: # http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/svn.html#svn-mirrors -#SVN_HOST=svn.FreeBSD.org +SVN_HOST=svn0.us-east.FreeBSD.org # Automatic OPTION change detection # When bulk building packages, compare the options from kept packages to @@ -89,7 +92,7 @@ DISTFILES_CACHE=/usr/ports/distfiles # will be deleted and the port will be rebuilt. # Valid options: yes, no, verbose # verbose will display the old and new options -#CHECK_CHANGED_OPTIONS=verbose +CHECK_CHANGED_OPTIONS=yes # Automatic Dependency change detection # When bulk building packages, compare the dependencies from kept packages to @@ -98,16 +101,16 @@ DISTFILES_CACHE=/usr/ports/distfiles # as DEFAULT_RUBY_VERSION, PERL_VERSION, WITHOUT_X11 that change dependencies # for many ports. # Valid options: yes, no -#CHECK_CHANGED_DEPS=yes +CHECK_CHANGED_DEPS=yes # Path to the RSA key to sign the PKGNG repo with. See pkg-repo(8) -#PKG_REPO_SIGNING_KEY=/etc/ssl/keys/repo.key +PKG_REPO_SIGNING_KEY=/usr/local/etc/ssl/poudriere/pkg.bsdserwis.com.key # ccache support. Supply the path to your ccache cache directory. # It will be mounted into the jail and be shared among all jails. -#CCACHE_DIR=/var/cache/ccache +CCACHE_DIR=/var/cache/ccache # # parallel build support. @@ -117,11 +120,11 @@ DISTFILES_CACHE=/usr/ports/distfiles # by specifying the -J flag to bulk/testport. # # Example to define PARALLEL_JOBS to one single job -# PARALLEL_JOBS=1 +PARALLEL_JOBS=5 # How many jobs should be used for preparing the build? These tend to # be more IO bound and may be worth tweaking. Default: Same as PARALLEL_JOBS -# PREPARE_PARALLEL_JOBS=1 +PREPARE_PARALLEL_JOBS=1 # If set, failed builds will save the WRKDIR to ${POUDRIERE_DATA}/wrkdirs @@ -129,7 +132,7 @@ DISTFILES_CACHE=/usr/ports/distfiles # Choose the default format for the workdir packing: could be tar,tgz,tbz,txz # default is tbz -# WRKDIR_ARCHIVE_FORMAT=tbz +WRKDIR_ARCHIVE_FORMAT=tar # Disable linux support # NOLINUX=yes @@ -160,21 +163,21 @@ DISTFILES_CACHE=/usr/ports/distfiles # Timestamp every line of build logs # Default: no -#TIMESTAMP_LOGS=no +TIMESTAMP_LOGS=yes # URL where your POUDRIERE_DATA/logs are hosted # This will be used for giving URL hints to the HTML output when # scheduling and starting builds -#URL_BASE=http://yourdomain.com/poudriere/ +URL_BASE=https://rtm.bsdserwis.com/poudriere/ # This defines the max time (in seconds) that a command may run for a build # before it is killed for taking too long. Default: 86400 -#MAX_EXECUTION_TIME=86400 +MAX_EXECUTION_TIME=86400 # This defines the time (in seconds) before a command is considered to # be in a runaway state for having no output on stdout. Default: 7200 -#NOHANG_TIME=7200 +NOHANG_TIME=7200 # The repository is updated atomically if set yes. This leaves the @@ -233,11 +236,11 @@ DISTFILES_CACHE=/usr/ports/distfiles # Define format for build duration times # Default: %H:%M:%S -#DURATION_FORMAT="%H:%M:%S" +DURATION_FORMAT="%H:%M:%S" # Use colors when in a TTY # Default: yes -#USE_COLORS=yes +USE_COLORS=yes # Only build what is requested. Do not rebuild build deps if nothing requested # depends on them. This can create an inconsistent repository if you often |
|
| Linia 169: | Linia 462: |
| }}} === Utworzenie "jail" na postawie źródeł serwera === {{{#!highlight bash numbers=off poudriere jail -c -a amd64 -j 10x64 -m src=/usr/src -f 10x64 -v 10.3-STABLE }}} === Aktualizacja OS na podstawie źródeł === {{{#!highlight bash numbers=off poudriere jail -u -j 10x64 }}} /!\ Aktualizacja nie podmienia pliku konfiguracyjnego `login.conf` dla danego jail. Dlatego też konieczne jest aktualizacja pliku "''ręcznie''", aby budowane pakiety były poprawnie oznaczone {{{ default:\ :passwd_format=sha512:\ :copyright=/etc/COPYRIGHT:\ :welcome=/etc/motd:\ :setenv=MAIL=/var/mail/$,BLOCKSIZE=K,UNAME_r=10.3-STABLE,UNAME_v=FreeBSD 10.3-STABLE,OSVERSION=1003503:\ [...] }}} Dodatkowo może być konieczna modyfikacja pliku konfiguracyjnego samego `poudriere`: {{{#!highlight bash numbers=off echo "10.3-STABLE" > /usr/local/etc/poudriere.d/jails/10x64/version |
Spis Treści
- Jak korzystać z poudriere
- Konfiguracja poudriere jail inside
- Instalacja oraz konfiguracja poudriere
- Korzystanie z poudriere
- Utworzenie własnego repozytorium
- Alternatywny konfig dla pourdiere na serwerze HQ
- Jak poprawić zawartość jail dla poudriere
- Źródła w sieci internet
Jak korzystać z poudriere
Ten przepis dotyczy uruchomienia własnego jaila z poudriere w celu budowania paczek dla pozostałych jail-i. Niemniej niektóre ogólne rzeczy są przydatne również dla serwerów bez jail-i.
Konfiguracja poudriere jail inside
Konfiguracja zfs na potrzeby poudriere w jail
zfs create -o jailed=on -o mountpoint=/usr/jails/pkg.wtp3.local sys/data/u/jails/pkg.wtp3.local
zfs create -o jailed=on -o canmount=on -o mountpoint=/pkg sys/data/pkg
zfs create -p -o poudriere:type=data -o atime=off -o mountpoint=/pkg/data sys/data/pkg/data
zfs create -o exec=on sys/data/pkg/data/.m
zfs create -o compression=off sys/data/pkg/data/cache
zfs create -o compression=lz4 sys/data/pkg/data/logs
zfs create -o compression=off sys/data/pkg/data/packages
zfs create -o compression=off sys/data/pkg/data/wrkdirs
zfs create -p -o compression=lz4 -o atime=off -o mountpoint=/pkg/ports/default sys/data/pkg/ports/default
/etc/fstab
# --- JAILS --------------------------------------------------------------------------- # sys/data/u/jails/pkg.wtp3.local /usr/jails/pkg.wtp3.local zfs rw,noatime,nfsv4acls 0 0 # --- Dodatki do JAILS ----------------------------------------------------------------- # sys/data/pkg /usr/jails/pkg.wtp3.local/pkg zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/data /usr/jails/pkg.wtp3.local/pkg/data zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/data/.m /usr/jails/pkg.wtp3.local/pkg/data/.m zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/data/cache /usr/jails/pkg.wtp3.local/pkg/data/cache zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/data/logs /usr/jails/pkg.wtp3.local/pkg/data/logs zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/data/packages /usr/jails/pkg.wtp3.local/pkg/data/packages zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/data/wrkdirs /usr/jails/pkg.wtp3.local/pkg/data/wrkdirs zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/jails /usr/jails/pkg.wtp3.local/pkg/jails zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/ports /usr/jails/pkg.wtp3.local/pkg/ports zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/ports/default /usr/jails/pkg.wtp3.local/pkg/ports/default zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 /usr/src /usr/jails/pkg.wtp3.local/usr/src nullfs ro,late 0 0 /usr/obj /usr/jails/pkg.wtp3.local/usr/obj nullfs ro,late 0 0
Zamontowanie katalogów /usr/src oraz /usr/obj potrzebne w celu wykonania jaila ze źródeł systemu (własna konfiguracja)
Konfiguracja /etc/jail.conf
pkg_wtp3_local {
host.hostname = "pkg.stenda.jails";
path = "/usr/jails/pkg.wtp3.local";
ip4.addr += "10.20.11.32/32";
ip4.addr += "127.0.0.1/32";
allow.raw_sockets = 0;
exec.clean;
exec.consolelog = "/var/log/jails/pkg.wtp3.local_console.log";
mount += "procfs /usr/jails/pkg.wtp3.local/proc procfs rw 0 0";
allow.set_hostname = 0;
persist;
children.max=10;
allow.mount;
allow.mount.tmpfs;
allow.mount.devfs;
allow.mount.procfs;
allow.mount.zfs;
allow.mount.nullfs;
allow.raw_sockets;
allow.socket_af;
allow.sysvipc;
allow.chflags;
enforce_statfs=1;
ip6=inherit;
ip4=inherit;
}
WAŻNE poudriere wymaga, aby interfejs lo0 posiadała adres 127.0.0.1. W przeciwnym przypadku nie ma możliwości uruchomienia budowania paczek.
Utworzenie brakujących katalogów
Poprzez konsolę jaila należy utworzyć brakujące katalogi:
mkdir -p /var/cache/ccache /var/cache/distfiles
Załadowanie potrzebnych modułów jądra
Ręcznie w celu pierwszego uruchomienia:
kldload tmpfs
W pliku /boot/loader.conf w celu uruchomienia przy uruchamianiu serwera:
# TMPFS na potrzeby poudriere
#
tmpfs_load="YES"
Instalacja oraz konfiguracja poudriere
Zainstalowanie poudriere
pkg install -y pourdriere
Plik konfiguracyjny
Wersja dla jail
--- poudriere.conf.sample 2016-08-14 01:59:19.000000000 +0200
+++ poudriere.conf 2016-08-17 23:56:33.541134000 +0200
@@ -9,7 +9,7 @@
# You need at least 7GB of free space in this pool to have a working
# poudriere.
#
-#ZPOOL=tank
+ZPOOL=sys/data
### NO ZFS
# To not use ZFS, define NO_ZFS=yes
@@ -26,17 +26,16 @@
#
# Also note that every protocols supported by fetch(1) are supported here, even
# file:///
-# Suggested: https://download.FreeBSD.org
-FREEBSD_HOST=_PROTO_://_CHANGE_THIS_
+FREEBSD_HOST=http://ftp.freebsd.org
# By default the jails have no /etc/resolv.conf, you will need to set
-# RESOLV_CONF to a file on your hosts system that will be copied has
+# REVOLV_CONF to a file on your hosts system that will be copied has
# /etc/resolv.conf for the jail, except if you don't need it (using an http
# proxy for example)
RESOLV_CONF=/etc/resolv.conf
# The directory where poudriere will store jails and ports
-BASEFS=/usr/local/poudriere
+BASEFS=/pkg
# The directory where the jail will store the packages and logs
# by default a zfs filesystem will be created and set to
@@ -49,8 +48,8 @@ USE_PORTLINT=no
# When building packages, a memory device can be used to speedup the build.
# Only one of MFSSIZE or USE_TMPFS is supported. TMPFS is generally faster
-# and will expand to the needed amount of RAM. MFS is a slower since it
-# uses UFS and several abstraction layers.
+# and will expand to the needed amount of RAM. MFS is a bit slower, but is
+# more mature and can have its memory usage capped.
# If set WRKDIRPREFIX will be mdmfs of the given size (mM or gG)
#MFSSIZE=4G
@@ -71,17 +70,21 @@ USE_TMPFS=yes
# How much memory to limit jail processes to for *each builder*
# in GiB (default: none)
-#MAX_MEMORY=8
+MAX_MEMORY=2
# If set the given directory will be used for the distfiles
# This allows to share the distfiles between jails and ports tree
-DISTFILES_CACHE=/usr/ports/distfiles
+DISTFILES_CACHE=/var/cache/distfiles
+
+# If set the ports or source tree marked to use csup method will use the defined mirror
+# Note: csup is deprecated. Use svn instead.
+#CSUP_HOST=cvsup._CHANGE_THIS_.freebsd.org
# If set the ports tree or source tree marked to use svn will use the defined
-# mirror (default: svn.FreeBSD.org)
+# mirror (default: svn0.us-west.FreeBSD.org)
# The full mirror list is available here:
# http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/svn.html#svn-mirrors
-#SVN_HOST=svn.FreeBSD.org
+SVN_HOST=svn0.us-east.FreeBSD.org
# Automatic OPTION change detection
# When bulk building packages, compare the options from kept packages to
@@ -89,7 +92,7 @@ DISTFILES_CACHE=/usr/ports/distfiles
# will be deleted and the port will be rebuilt.
# Valid options: yes, no, verbose
# verbose will display the old and new options
-#CHECK_CHANGED_OPTIONS=verbose
+CHECK_CHANGED_OPTIONS=yes
# Automatic Dependency change detection
# When bulk building packages, compare the dependencies from kept packages to
@@ -98,16 +101,16 @@ DISTFILES_CACHE=/usr/ports/distfiles
# as DEFAULT_RUBY_VERSION, PERL_VERSION, WITHOUT_X11 that change dependencies
# for many ports.
# Valid options: yes, no
-#CHECK_CHANGED_DEPS=yes
+CHECK_CHANGED_DEPS=yes
# Path to the RSA key to sign the PKGNG repo with. See pkg-repo(8)
-#PKG_REPO_SIGNING_KEY=/etc/ssl/keys/repo.key
+PKG_REPO_SIGNING_KEY=/usr/local/etc/ssl/poudriere/pkg.bsdserwis.com.key
# ccache support. Supply the path to your ccache cache directory.
# It will be mounted into the jail and be shared among all jails.
-#CCACHE_DIR=/var/cache/ccache
+CCACHE_DIR=/var/cache/ccache
#
# parallel build support.
@@ -117,11 +120,11 @@ DISTFILES_CACHE=/usr/ports/distfiles
# by specifying the -J flag to bulk/testport.
#
# Example to define PARALLEL_JOBS to one single job
-# PARALLEL_JOBS=1
+PARALLEL_JOBS=2
# How many jobs should be used for preparing the build? These tend to
# be more IO bound and may be worth tweaking. Default: Same as PARALLEL_JOBS
-# PREPARE_PARALLEL_JOBS=1
+PREPARE_PARALLEL_JOBS=1
# If set, failed builds will save the WRKDIR to ${POUDRIERE_DATA}/wrkdirs
@@ -129,10 +132,10 @@ DISTFILES_CACHE=/usr/ports/distfiles
# Choose the default format for the workdir packing: could be tar,tgz,tbz,txz
# default is tbz
-# WRKDIR_ARCHIVE_FORMAT=tbz
+WRKDIR_ARCHIVE_FORMAT=tar
# Disable linux support
-# NOLINUX=yes
+NOLINUX=yes
# By default poudriere sets FORCE_PACKAGE
# To disable it (useful when building public packages):
@@ -160,21 +163,21 @@ DISTFILES_CACHE=/usr/ports/distfiles
# Timestamp every line of build logs
# Default: no
-#TIMESTAMP_LOGS=no
+TIMESTAMP_LOGS=yes
# URL where your POUDRIERE_DATA/logs are hosted
# This will be used for giving URL hints to the HTML output when
# scheduling and starting builds
-#URL_BASE=http://yourdomain.com/poudriere/
+URL_BASE=https://pkg.wtp3.local/poudriere/
# This defines the max time (in seconds) that a command may run for a build
# before it is killed for taking too long. Default: 86400
-#MAX_EXECUTION_TIME=86400
+MAX_EXECUTION_TIME=86400
# This defines the time (in seconds) before a command is considered to
# be in a runaway state for having no output on stdout. Default: 7200
-#NOHANG_TIME=7200
+NOHANG_TIME=7200
# The repository is updated atomically if set yes. This leaves the
@@ -233,11 +236,11 @@ DISTFILES_CACHE=/usr/ports/distfiles
# Define format for build duration times
# Default: %H:%M:%S
-#DURATION_FORMAT="%H:%M:%S"
+DURATION_FORMAT="%H:%M:%S"
# Use colors when in a TTY
# Default: yes
-#USE_COLORS=yes
+USE_COLORS=yes
# Only build what is requested. Do not rebuild build deps if nothing requested
# depends on them. This can create an inconsistent repository if you often
Wersja bez jail
--- poudriere.conf.sample 2016-07-01 01:50:31.000000000 +0200
+++ poudriere.conf 2016-06-28 02:21:49.699957000 +0200
@@ -9,7 +9,7 @@
# You need at least 7GB of free space in this pool to have a working
# poudriere.
#
-#ZPOOL=tank
+ZPOOL=tank
### NO ZFS
# To not use ZFS, define NO_ZFS=yes
@@ -26,17 +26,16 @@
#
# Also note that every protocols supported by fetch(1) are supported here, even
# file:///
-# Suggested: https://download.FreeBSD.org
-FREEBSD_HOST=_PROTO_://_CHANGE_THIS_
+FREEBSD_HOST=http://ftp.freebsd.org
# By default the jails have no /etc/resolv.conf, you will need to set
-# RESOLV_CONF to a file on your hosts system that will be copied has
+# REVOLV_CONF to a file on your hosts system that will be copied has
# /etc/resolv.conf for the jail, except if you don't need it (using an http
# proxy for example)
RESOLV_CONF=/etc/resolv.conf
# The directory where poudriere will store jails and ports
-BASEFS=/usr/local/poudriere
+BASEFS=/opt/poudriere
# The directory where the jail will store the packages and logs
# by default a zfs filesystem will be created and set to
@@ -49,8 +48,8 @@ USE_PORTLINT=no
# When building packages, a memory device can be used to speedup the build.
# Only one of MFSSIZE or USE_TMPFS is supported. TMPFS is generally faster
-# and will expand to the needed amount of RAM. MFS is a slower since it
-# uses UFS and several abstraction layers.
+# and will expand to the needed amount of RAM. MFS is a bit slower, but is
+# more mature and can have its memory usage capped.
# If set WRKDIRPREFIX will be mdmfs of the given size (mM or gG)
#MFSSIZE=4G
@@ -77,11 +76,15 @@ USE_TMPFS=yes
# This allows to share the distfiles between jails and ports tree
DISTFILES_CACHE=/usr/ports/distfiles
+# If set the ports or source tree marked to use csup method will use the defined mirror
+# Note: csup is deprecated. Use svn instead.
+#CSUP_HOST=cvsup._CHANGE_THIS_.freebsd.org
+
# If set the ports tree or source tree marked to use svn will use the defined
-# mirror (default: svn.FreeBSD.org)
+# mirror (default: svn0.us-west.FreeBSD.org)
# The full mirror list is available here:
# http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/svn.html#svn-mirrors
-#SVN_HOST=svn.FreeBSD.org
+SVN_HOST=svn0.us-east.FreeBSD.org
# Automatic OPTION change detection
# When bulk building packages, compare the options from kept packages to
@@ -89,7 +92,7 @@ DISTFILES_CACHE=/usr/ports/distfiles
# will be deleted and the port will be rebuilt.
# Valid options: yes, no, verbose
# verbose will display the old and new options
-#CHECK_CHANGED_OPTIONS=verbose
+CHECK_CHANGED_OPTIONS=yes
# Automatic Dependency change detection
# When bulk building packages, compare the dependencies from kept packages to
@@ -98,16 +101,16 @@ DISTFILES_CACHE=/usr/ports/distfiles
# as DEFAULT_RUBY_VERSION, PERL_VERSION, WITHOUT_X11 that change dependencies
# for many ports.
# Valid options: yes, no
-#CHECK_CHANGED_DEPS=yes
+CHECK_CHANGED_DEPS=yes
# Path to the RSA key to sign the PKGNG repo with. See pkg-repo(8)
-#PKG_REPO_SIGNING_KEY=/etc/ssl/keys/repo.key
+PKG_REPO_SIGNING_KEY=/usr/local/etc/ssl/poudriere/pkg.bsdserwis.com.key
# ccache support. Supply the path to your ccache cache directory.
# It will be mounted into the jail and be shared among all jails.
-#CCACHE_DIR=/var/cache/ccache
+CCACHE_DIR=/var/cache/ccache
#
# parallel build support.
@@ -117,11 +120,11 @@ DISTFILES_CACHE=/usr/ports/distfiles
# by specifying the -J flag to bulk/testport.
#
# Example to define PARALLEL_JOBS to one single job
-# PARALLEL_JOBS=1
+PARALLEL_JOBS=5
# How many jobs should be used for preparing the build? These tend to
# be more IO bound and may be worth tweaking. Default: Same as PARALLEL_JOBS
-# PREPARE_PARALLEL_JOBS=1
+PREPARE_PARALLEL_JOBS=1
# If set, failed builds will save the WRKDIR to ${POUDRIERE_DATA}/wrkdirs
@@ -129,7 +132,7 @@ DISTFILES_CACHE=/usr/ports/distfiles
# Choose the default format for the workdir packing: could be tar,tgz,tbz,txz
# default is tbz
-# WRKDIR_ARCHIVE_FORMAT=tbz
+WRKDIR_ARCHIVE_FORMAT=tar
# Disable linux support
# NOLINUX=yes
@@ -160,21 +163,21 @@ DISTFILES_CACHE=/usr/ports/distfiles
# Timestamp every line of build logs
# Default: no
-#TIMESTAMP_LOGS=no
+TIMESTAMP_LOGS=yes
# URL where your POUDRIERE_DATA/logs are hosted
# This will be used for giving URL hints to the HTML output when
# scheduling and starting builds
-#URL_BASE=http://yourdomain.com/poudriere/
+URL_BASE=https://rtm.bsdserwis.com/poudriere/
# This defines the max time (in seconds) that a command may run for a build
# before it is killed for taking too long. Default: 86400
-#MAX_EXECUTION_TIME=86400
+MAX_EXECUTION_TIME=86400
# This defines the time (in seconds) before a command is considered to
# be in a runaway state for having no output on stdout. Default: 7200
-#NOHANG_TIME=7200
+NOHANG_TIME=7200
# The repository is updated atomically if set yes. This leaves the
@@ -233,11 +236,11 @@ DISTFILES_CACHE=/usr/ports/distfiles
# Define format for build duration times
# Default: %H:%M:%S
-#DURATION_FORMAT="%H:%M:%S"
+DURATION_FORMAT="%H:%M:%S"
# Use colors when in a TTY
# Default: yes
-#USE_COLORS=yes
+USE_COLORS=yes
# Only build what is requested. Do not rebuild build deps if nothing requested
# depends on them. This can create an inconsistent repository if you often
Korzystanie z poudriere
ports
Utworzenie drzewa
poudriere ports -c
aktualizacja drzewa
Trzeba dopisać do zadania w crontabie:
poudriere ports -u
jails (ale dla poudriere, nie globalny dla systemu)
Utworzenie "jail" dla wybranego OS
poudriere jail -c -j 93x64 -v 9.3-RELEASE -a amd64
Aktualizacja wybranego OS
poudriere jail -u -j 91x64
Utworzenie "jail" na postawie źródeł serwera
poudriere jail -c -a amd64 -j 10x64 -m src=/usr/src -f 10x64 -v 10.3-STABLE
Aktualizacja OS na podstawie źródeł
poudriere jail -u -j 10x64
Aktualizacja nie podmienia pliku konfiguracyjnego login.conf dla danego jail. Dlatego też konieczne jest aktualizacja pliku "ręcznie", aby budowane pakiety były poprawnie oznaczone
default:\
:passwd_format=sha512:\
:copyright=/etc/COPYRIGHT:\
:welcome=/etc/motd:\
:setenv=MAIL=/var/mail/$,BLOCKSIZE=K,UNAME_r=10.3-STABLE,UNAME_v=FreeBSD 10.3-STABLE,OSVERSION=1003503:\
[...]Dodatkowo może być konieczna modyfikacja pliku konfiguracyjnego samego poudriere:
echo "10.3-STABLE" > /usr/local/etc/poudriere.d/jails/10x64/version
Utworzenie odpowiedniego make.conf dla danego jaila
vi /usr/local/etc/poudriere.d/93x64-make.conf
Trzeba utworzyć na podstawie istniejącego w systemie pliku (a właściwie plików)
CPUTYPE?= nocona
MASTER_SITE_BACKUP?= \
http://ftp.bsdserwis.com/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/ \
http://distcache.ath.pl/${DIST_SUBDIR}/ \
http://distcache.FreeBSD.org/ports-distfiles/${DIST_SUBDIR}/
# --- domy/slne wersje dla wybranych aplikacji ----------------------------
#
DEFAULT_VERSIONS+= apache=2.2
DEFAULT_VERSIONS+= ruby=2.1
DEFAULT_VERSIONS+= mysql=5.5
DEFAULT_VERSIONS+= pgsql=9.2
DEFAULT_VERSIONS+= perl=5.20
# --- opcje globalne dla wszystkich ports ---------------------------------
#
OPTIONS_UNSET+= X11
# --- opcje dla poszczeg/olnych ports -------------------------------------
#
security_apg_SET= CRACKLIB
graphics_ImageMagick-nox11_UNSET=MODULES
# --- u/zycie pkgng -------------------------------------------------------
#
WITH_PKGNG= yes
NO_WARNING_PKG_INSTALL_EOL= yes
# --- ustawienia dotycz/ace wydruk/ow (np. teTeX) -------------------------
#
PAPERSIZE= a4
A4= yes
SVN_UPDATE= yes
SVN= /usr/local/bin/svn
WANT_MYSQL_VER= 55
WITH_MYSQL_VER= 55
WITH_OPENSSL_PORT= yes
WITH_OPENLDAP_VER= 24
WANT_OPENLDAP_VER= 24
WITH_BDB_VER= 5
WITH_SENDMAIL_BASE= yes
X11BASE= ${LOCALBASE}
# This setting to build kernel without -Werror:
WERROR=
# --- uz/ycie CLANG zamiast GCC -----------------------------------------------
#
CC= clang
CXX= clang++
CPP= clang-cpp
Utworzenie listy pakietów do budowania
vi /usr/local/etc/poudriere.d/93x64.pkglist
Która to może powstać na podstawie zainstalowanych pakietów:
pkg info -o -aq | sort -d
i w wyniku powstanie plik:
ports-mgmt/dialog4ports databases/rrdtool databases/ruby-bdb databases/sqlite3 devel/apr1 devel/autoconf devel/autoconf-wrapper devel/automake devel/automake-wrapper devel/bison dns/bind-tools dns/idnkit dns/ldns dns/libidn dns/unbound editors/vim ftp/curl ftp/ncftp3 ftp/wget graphics/cairo graphics/graphite2 graphics/png lang/ocaml lang/perl5.20 lang/python2 lang/python27 lang/ruby21 misc/help2man dns/nsd lang/perl5.20 mail/postfix mail/ssmtp net/liboping net-mgmt/collectd5 net-mgmt/ipcalc net-mgmt/net-snmp net/mtr net/netcat net/openntpd net/trafshow net/unison net-mgmt/collectd5 security/apg security/ca_root_nss security/clamav security/cracklib security/ipfmeta security/libgcrypt security/libgpg-error security/libssh2 security/nmap security/openssh-portable security/openssl security/sudo security/xinetd shells/bash sysutils/afio sysutils/daemontools sysutils/dmidecode sysutils/ezjail sysutils/freebsd-snapshot sysutils/lsof sysutils/moreutils sysutils/screen sysutils/smartmontools textproc/expat2 textproc/fex www/apache22 www/nginx
Nie należy się martwić o zależności - zostaną odpowiednio uwzględnione. Tak więc lista może być o wiele krótsza - zawierać pakiety naprawdę niezbędne.
Wygenerowanie opcji dla każdego z budowanych pakietów
Dla pojedynczego pakietu:
poudriere options security/apg
Albo dla całej listy:
poudriere options -cf /usr/local/etc/poudriere.d/93x64.pkglist
Budowanie pakietów
poudriere bulk -f /usr/local/etc/poudriere.d/93x64.pkglist -j 93x64
Utworzenie własnego repozytorium
Wygenerowanie certyfikatu dla aktualizacji pakietów
mkdir -p /usr/local/etc/pki/poudriere
/usr/local/bin/openssl genrsa -out /usr/local/etc/pki/poudriere/poudriere.key 4096
/usr/local/bin/openssl rsa -in /usr/local/etc/pki/poudriere/poudriere.key -pubout -out /usr/local/etc/pki/poudriere/poudriere.crt
Konfiguracja witryny webowej z repozytorium
Można skorzystać z tego przepisu w celu uruchomienia nginx. W przypadku konfiguracji apache wygląda to następująco:
<Directory /opt/poudriere/data/packages>
Options Indexes FollowSymLinks
Order allow,deny
Allow from all
</Directory>
<VirtualHost 188.165.252.223:80 2001:41d0:2:c7df::1:80>
ServerName pkg.bsdserwis.com
DocumentRoot /opt/poudriere/data/packages
ErrorLog /var/log/httpd/pkg.bsdserwis.com/error.log
CustomLog /var/log/httpd/pkg.bsdserwis.com/access.log combined
</VirtualHost>
Konfiguracja klienta
Przegranie klucza
Po pierwsze trzeba przegrać poudriere.crt na serwery, które mają korzystać z tego repozytorium:
mkdir -p /usr/local/etc/ssl/certs/
fetch http://ca.bsdserwis.com/pkg.bsdserwis.com.crt -o /usr/local/etc/ssl/certs/pkg.bsdserwis.com.crt
Konfiguracja repozytorium
mkdir -p /usr/local/etc/pkg/repos
vi /usr/local/etc/pkg/repos/pkg.bsdserwis.com.conf
Zaś zawartość tego pliku jest następująca:
pkg.bsdserwis.com: {
url: "http://pkg.bsdserwis.com/10x64-default",
mirror_type: "http",
signature_type: "pubkey",
pubkey: "/usr/local/etc/ssl/certs/pkg.bsdserwis.com.crt",
enabled: yes
}Dodatkowo można wyłączyć repozytorium globalne:
echo "FreeBSD: { enabled: no }" > /usr/local/etc/pkg/repos/FreeBSD.conf
Aktualizacja ustawień pkg
Już pozostaje tylko wykonać polecenie:
# poniższą linijkę warto dopisać do zadania /etc/daily.local
#
pkg update -q && pkg version -vRL=
Instalowanie wybranych pakietów
Co warto zainstalować w środowisku jail to już jest opisane w instrukcji uruchamiania środowiska jail.
Alternatywny konfig dla pourdiere na serwerze HQ
--- poudriere.conf.sample 2015-05-30 13:39:31.689236000 +0200
+++ poudriere.conf 2015-03-12 11:58:24.910000627 +0100
@@ -9,7 +9,7 @@
# You need at least 7GB of free space in this pool to have a working
# poudriere.
#
-#ZPOOL=tank
+ZPOOL=tank
### NO ZFS
# To not use ZFS, define NO_ZFS=yes
@@ -26,16 +26,16 @@
#
# Also note that every protocols supported by fetch(1) are supported here, even
# file:///
-FREEBSD_HOST=_PROTO_://_CHANGE_THIS_
+FREEBSD_HOST=ftp://ftp.freebsd.org
# By default the jails have no /etc/resolv.conf, you will need to set
-# RESOLV_CONF to a file on your hosts system that will be copied has
+# REVOLV_CONF to a file on your hosts system that will be copied has
# /etc/resolv.conf for the jail, except if you don't need it (using an http
# proxy for example)
RESOLV_CONF=/etc/resolv.conf
# The directory where poudriere will store jails and ports
-BASEFS=/usr/local/poudriere
+BASEFS=/opt/poudriere
# The directory where the jail will store the packages and logs
# by default a zfs filesystem will be created and set to
@@ -84,7 +84,7 @@
# mirror (default: svn0.us-west.FreeBSD.org)
# The full mirror list is available here:
# http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/svn.html#svn-mirrors
-#SVN_HOST=svn0.us-west.FreeBSD.org
+SVN_HOST=svn0.us-east.FreeBSD.org
# Automatic OPTION change detection
# When bulk building packages, compare the options from kept packages to
@@ -92,7 +92,7 @@
# will be deleted and the port will be rebuilt.
# Valid options: yes, no, verbose
# verbose will display the old and new options
-#CHECK_CHANGED_OPTIONS=verbose
+CHECK_CHANGED_OPTIONS=yes
# Automatic Dependency change detection
# When bulk building packages, compare the dependencies from kept packages to
@@ -101,7 +101,7 @@
# as DEFAULT_RUBY_VERSION, PERL_VERSION, WITHOUT_X11 that change dependencies
# for many ports.
# Valid options: yes, no
-#CHECK_CHANGED_DEPS=yes
+CHECK_CHANGED_DEPS=yes
# Path to the RSA key to sign the PKGNG repo with. See pkg-repo(8)
@@ -110,7 +110,7 @@
# ccache support. Supply the path to your ccache cache directory.
# It will be mounted into the jail and be shared among all jails.
-#CCACHE_DIR=/var/cache/ccache
+CCACHE_DIR=/var/cache/ccache
#
# parallel build support.
@@ -120,7 +120,7 @@
# by specifying the -J flag to bulk/testport.
#
# Example to define PARALLEL_JOBS to one single job
-# PARALLEL_JOBS=1
+#PARALLEL_JOBS=1
# How many jobs should be used for preparing the build? These tend to
# be more IO bound and may be worth tweaking. Default: Same as PARALLEL_JOBS
@@ -132,7 +132,7 @@
# Choose the default format for the workdir packing: could be tar,tgz,tbz,txz
# default is tbz
-# WRKDIR_ARCHIVE_FORMAT=tbz
+WRKDIR_ARCHIVE_FORMAT=tar
# Disable linux support
# NOLINUX=yes
@@ -163,21 +163,21 @@
# Timestamp every line of build logs
# Default: no
-#TIMESTAMP_LOGS=no
+TIMESTAMP_LOGS=yes
# URL where your POUDRIERE_DATA/logs are hosted
# This will be used for giving URL hints to the HTML output when
# scheduling and starting builds
-#URL_BASE=http://yourdomain.com/poudriere/
+URL_BASE=http://rtm.bsdserwis.com/poudriere/
# This defines the max time (in seconds) that a command may run for a build
# before it is killed for taking too long. Default: 86400
-#MAX_EXECUTION_TIME=86400
+MAX_EXECUTION_TIME=86400
# This defines the time (in seconds) before a command is considered to
# be in a runaway state for having no output on stdout. Default: 7200
-#NOHANG_TIME=7200
+NOHANG_TIME=7200
# The repository is updated atomically if set yes. This leaves the
@@ -236,11 +236,11 @@
# Define format for build duration times
# Default: %H:%M:%S
-#DURATION_FORMAT="%H:%M:%S"
+DURATION_FORMAT="%H:%M:%S"
# Use colors when in a TTY
# Default: yes
-#USE_COLORS=yes
+USE_COLORS=yes
# Only build what is requested. Do not rebuild build deps if nothing requested
# depends on them. This can create an inconsistent repository if you often
Jak poprawić zawartość jail dla poudriere
Zgodnie z dokumentacją poudriere montując jaila korzysta ze snapshota o nazwie clean dla danego jaila. Może być w tym pomocne polecenie (skrypt) snapshot:
snapshot list | grep poudriere
/opt/poudriere/jails/93amd64 777MB 0.0% 0KB 0.0% clean
/opt/poudriere/jails/a1amd64 881MB 0.1% 140KB 0.0% clean
/opt/poudriere/jails/10x64 704MB 0.0% 0KB 0.0% clean
Zatem po modyfikacji jaila (np. ręcznym dograniu bibliotek związanych z libmilter) należy wykonać następujące polecenia:
zfs destroy tank/poudriere/jails/10x64@clean
zfs snapshot tank/poudriere/jails/10x64@clean
Potem już będzie poprawnie działać poudriere bulk.
Źródła w sieci internet
http://www.neant.ro/2013/03/building-a-package-repository-for-freebsd-with-poudriere-and-pkgng/1
http://savagedlight.me/2014/03/09/freebsd-package-builder-with-poudriere/1
(c) 2004 - 2026 BSD Serwis Krzysztof Stryjek. W przypadku błędów, poprawek proszę kontaktować się z administratorem wiki.
