Różnice pomiędzy wersjami 14 i 15
⇤ ← Wersja 14 z 2016-08-22 10:00:13 →
Rozmiar: 30611
Edytor: wtps0n
Komentarz: literówki; uzupełnienie informacji o potrzebnych paczkach, katalogach
← Wersja 15 z 2016-08-22 12:20:04 → ⇥
Rozmiar: 30656
Edytor: wtps0n
Komentarz: + partycja jails dla pkg/poudriere wraz z minimalnymi uprawnieniami
Usunięcia zostały oznaczone w ten sposób. Dodatki zostały oznaczone w ten sposób.
Linia 22: Linia 22:
zfs create -p -o exec=on sys/data/pkg/jails
Linia 39: Linia 40:
sys/data/pkg/jails /usr/jails/pkg.wtp3.local/pkg/jails zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/jails /usr/jails/pkg.wtp3.local/pkg/jails zfs rw,nosuid,noatime,nfsv4acls        0 0


Jak korzystać z poudriere

Ten przepis dotyczy uruchomienia własnego jaila z poudriere w celu budowania paczek dla pozostałych jail-i. Niemniej niektóre ogólne rzeczy są przydatne również dla serwerów bez jail-i.

Konfiguracja poudriere jail inside

Konfiguracja zfs na potrzeby poudriere w jail

zfs create -o jailed=on  -o mountpoint=/usr/jails/pkg.wtp3.local sys/data/u/jails/pkg.wtp3.local
zfs create -o jailed=on -o canmount=on -o mountpoint=/pkg sys/data/pkg
zfs create -p -o poudriere:type=data -o atime=off -o mountpoint=/pkg/data sys/data/pkg/data
zfs create -o exec=on sys/data/pkg/data/.m
zfs create -o compression=off sys/data/pkg/data/cache
zfs create -o compression=lz4 sys/data/pkg/data/logs
zfs create -o compression=off sys/data/pkg/data/packages
zfs create -o compression=off sys/data/pkg/data/wrkdirs
zfs create -p -o compression=lz4 -o atime=off -o mountpoint=/pkg/ports/default sys/data/pkg/ports/default
zfs create -p -o exec=on sys/data/pkg/jails

/etc/fstab

# --- JAILS ---------------------------------------------------------------------------
#
sys/data/u/jails/pkg.wtp3.local /usr/jails/pkg.wtp3.local zfs   rw,noatime,nfsv4acls    0 0

# --- Dodatki do JAILS -----------------------------------------------------------------
#
sys/data/pkg                    /usr/jails/pkg.wtp3.local/pkg           zfs     rw,noexec,nosuid,noatime,nfsv4acls      0 0
sys/data/pkg/data               /usr/jails/pkg.wtp3.local/pkg/data      zfs     rw,noexec,nosuid,noatime,nfsv4acls      0 0
sys/data/pkg/data/.m            /usr/jails/pkg.wtp3.local/pkg/data/.m   zfs     rw,nosuid,noatime,nfsv4acls             0 0
sys/data/pkg/data/cache         /usr/jails/pkg.wtp3.local/pkg/data/cache zfs    rw,noexec,nosuid,noatime,nfsv4acls      0 0
sys/data/pkg/data/logs          /usr/jails/pkg.wtp3.local/pkg/data/logs zfs     rw,noexec,nosuid,noatime,nfsv4acls      0 0
sys/data/pkg/data/packages      /usr/jails/pkg.wtp3.local/pkg/data/packages zfs rw,noexec,nosuid,noatime,nfsv4acls      0 0
sys/data/pkg/data/wrkdirs       /usr/jails/pkg.wtp3.local/pkg/data/wrkdirs zfs  rw,noexec,nosuid,noatime,nfsv4acls      0 0
sys/data/pkg/jails              /usr/jails/pkg.wtp3.local/pkg/jails     zfs     rw,nosuid,noatime,nfsv4acls             0 0
sys/data/pkg/ports              /usr/jails/pkg.wtp3.local/pkg/ports     zfs     rw,noexec,nosuid,noatime,nfsv4acls      0 0
sys/data/pkg/ports/default      /usr/jails/pkg.wtp3.local/pkg/ports/default zfs rw,noexec,nosuid,noatime,nfsv4acls      0 0
/usr/src                        /usr/jails/pkg.wtp3.local/usr/src               nullfs  ro,late                         0 0
/usr/obj                        /usr/jails/pkg.wtp3.local/usr/obj               nullfs  ro,late                         0 0

Zamontowanie katalogów /usr/src oraz /usr/obj potrzebne w celu wykonania jaila ze źródeł systemu (własna konfiguracja)

Konfiguracja /etc/jail.conf

pkg_wtp3_local {
        host.hostname = "pkg.stenda.jails";
        path = "/usr/jails/pkg.wtp3.local";
        ip4.addr += "10.20.11.32/32";
        ip4.addr += "127.0.0.1/32";
        allow.raw_sockets = 0;
        exec.clean;
        exec.consolelog = "/var/log/jails/pkg.wtp3.local_console.log";
        mount +=  "procfs /usr/jails/pkg.wtp3.local/proc procfs rw 0 0";
        allow.set_hostname = 0;
        persist;
        children.max=10;
        allow.mount;
        allow.mount.tmpfs;
        allow.mount.devfs;
        allow.mount.procfs;
        allow.mount.zfs;
        allow.mount.nullfs;
        allow.raw_sockets;
        allow.socket_af;
        allow.sysvipc;
        allow.chflags;
        enforce_statfs=1;
        ip6=inherit;
        ip4=inherit;
}

/!\ WAŻNE poudriere wymaga, aby interfejs lo0 posiadał adres 127.0.0.1. W przeciwnym przypadku nie ma możliwości uruchomienia budowania paczek.

Utworzenie brakujących katalogów

Poprzez konsolę jaila należy utworzyć brakujące katalogi:

mkdir -p /var/cache/ccache /var/cache/distfiles

Załadowanie potrzebnych modułów jądra

Ręcznie w celu pierwszego uruchomienia:

kldload tmpfs

W pliku /boot/loader.conf w celu uruchomienia przy uruchamianiu serwera:

# TMPFS na potrzeby poudriere
#
tmpfs_load="YES"

Instalacja oraz konfiguracja poudriere

Zainstalowanie poudriere

pkg install -y pourdriere ccache ports-mgmt/dialog4ports

Plik konfiguracyjny

Wersja dla jail

--- poudriere.conf.sample       2016-08-14 01:59:19.000000000 +0200
+++ poudriere.conf      2016-08-17 23:56:33.541134000 +0200
@@ -9,7 +9,7 @@
 # You need at least 7GB of free space in this pool to have a working
 # poudriere.
 #
-#ZPOOL=tank
+ZPOOL=sys/data

 ### NO ZFS
 # To not use ZFS, define NO_ZFS=yes
@@ -26,17 +26,16 @@
 #
 # Also note that every protocols supported by fetch(1) are supported here, even
 # file:///
-# Suggested: https://download.FreeBSD.org
-FREEBSD_HOST=_PROTO_://_CHANGE_THIS_
+FREEBSD_HOST=http://ftp.freebsd.org

 # By default the jails have no /etc/resolv.conf, you will need to set
-# RESOLV_CONF to a file on your hosts system that will be copied has
+# REVOLV_CONF to a file on your hosts system that will be copied has
 # /etc/resolv.conf for the jail, except if you don't need it (using an http
 # proxy for example)
 RESOLV_CONF=/etc/resolv.conf

 # The directory where poudriere will store jails and ports
-BASEFS=/usr/local/poudriere
+BASEFS=/pkg

 # The directory where the jail will store the packages and logs
 # by default a zfs filesystem will be created and set to
@@ -49,8 +48,8 @@ USE_PORTLINT=no

 # When building packages, a memory device can be used to speedup the build.
 # Only one of MFSSIZE or USE_TMPFS is supported. TMPFS is generally faster
-# and will expand to the needed amount of RAM. MFS is a slower since it
-# uses UFS and several abstraction layers.
+# and will expand to the needed amount of RAM. MFS is a bit slower, but is
+# more mature and can have its memory usage capped.

 # If set WRKDIRPREFIX will be mdmfs of the given size (mM or gG)
 #MFSSIZE=4G
@@ -71,17 +70,21 @@ USE_TMPFS=yes

 # How much memory to limit jail processes to for *each builder*
 # in GiB (default: none)
-#MAX_MEMORY=8
+MAX_MEMORY=2

 # If set the given directory will be used for the distfiles
 # This allows to share the distfiles between jails and ports tree
-DISTFILES_CACHE=/usr/ports/distfiles
+DISTFILES_CACHE=/var/cache/distfiles
+
+# If set the ports or source tree marked to use csup method will use the defined mirror
+# Note: csup is deprecated. Use svn instead.
+#CSUP_HOST=cvsup._CHANGE_THIS_.freebsd.org

 # If set the ports tree or source tree marked to use svn will use the defined
-# mirror (default: svn.FreeBSD.org)
+# mirror (default: svn0.us-west.FreeBSD.org)
 # The full mirror list is available here:
 # http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/svn.html#svn-mirrors
-#SVN_HOST=svn.FreeBSD.org
+SVN_HOST=svn0.us-east.FreeBSD.org

 # Automatic OPTION change detection
 # When bulk building packages, compare the options from kept packages to
@@ -89,7 +92,7 @@ DISTFILES_CACHE=/usr/ports/distfiles
 # will be deleted and the port will be rebuilt.
 # Valid options: yes, no, verbose
 # verbose will display the old and new options
-#CHECK_CHANGED_OPTIONS=verbose
+CHECK_CHANGED_OPTIONS=yes

 # Automatic Dependency change detection
 # When bulk building packages, compare the dependencies from kept packages to
@@ -98,16 +101,16 @@ DISTFILES_CACHE=/usr/ports/distfiles
 # as DEFAULT_RUBY_VERSION, PERL_VERSION, WITHOUT_X11 that change dependencies
 # for many ports.
 # Valid options: yes, no
-#CHECK_CHANGED_DEPS=yes
+CHECK_CHANGED_DEPS=yes


 # Path to the RSA key to sign the PKGNG repo with. See pkg-repo(8)
-#PKG_REPO_SIGNING_KEY=/etc/ssl/keys/repo.key
+PKG_REPO_SIGNING_KEY=/usr/local/etc/ssl/poudriere/pkg.bsdserwis.com.key


 # ccache support. Supply the path to your ccache cache directory.
 # It will be mounted into the jail and be shared among all jails.
-#CCACHE_DIR=/var/cache/ccache
+CCACHE_DIR=/var/cache/ccache
 #

 # parallel build support.
@@ -117,11 +120,11 @@ DISTFILES_CACHE=/usr/ports/distfiles
 # by specifying the -J flag to bulk/testport.
 #
 # Example to define PARALLEL_JOBS to one single job
-# PARALLEL_JOBS=1
+PARALLEL_JOBS=2

 # How many jobs should be used for preparing the build? These tend to
 # be more IO bound and may be worth tweaking. Default: Same as PARALLEL_JOBS
-# PREPARE_PARALLEL_JOBS=1
+PREPARE_PARALLEL_JOBS=1


 # If set, failed builds will save the WRKDIR to ${POUDRIERE_DATA}/wrkdirs
@@ -129,10 +132,10 @@ DISTFILES_CACHE=/usr/ports/distfiles

 # Choose the default format for the workdir packing: could be tar,tgz,tbz,txz
 # default is tbz
-# WRKDIR_ARCHIVE_FORMAT=tbz
+WRKDIR_ARCHIVE_FORMAT=tar

 # Disable linux support
-# NOLINUX=yes
+NOLINUX=yes

 # By default poudriere sets FORCE_PACKAGE
 # To disable it (useful when building public packages):
@@ -160,21 +163,21 @@ DISTFILES_CACHE=/usr/ports/distfiles

 # Timestamp every line of build logs
 # Default: no
-#TIMESTAMP_LOGS=no
+TIMESTAMP_LOGS=yes

 # URL where your POUDRIERE_DATA/logs are hosted
 # This will be used for giving URL hints to the HTML output when
 # scheduling and starting builds
-#URL_BASE=http://yourdomain.com/poudriere/
+URL_BASE=https://pkg.wtp3.local/poudriere/


 # This defines the max time (in seconds) that a command may run for a build
 # before it is killed for taking too long. Default: 86400
-#MAX_EXECUTION_TIME=86400
+MAX_EXECUTION_TIME=86400

 # This defines the time (in seconds) before a command is considered to
 # be in a runaway state for having no output on stdout. Default: 7200
-#NOHANG_TIME=7200
+NOHANG_TIME=7200


 # The repository is updated atomically if set yes. This leaves the
@@ -233,11 +236,11 @@ DISTFILES_CACHE=/usr/ports/distfiles

 # Define format for build duration times
 # Default: %H:%M:%S
-#DURATION_FORMAT="%H:%M:%S"
+DURATION_FORMAT="%H:%M:%S"

 # Use colors when in a TTY
 # Default: yes
-#USE_COLORS=yes
+USE_COLORS=yes

 # Only build what is requested. Do not rebuild build deps if nothing requested
 # depends on them. This can create an inconsistent repository if you often

Wersja bez jail

--- poudriere.conf.sample       2016-07-01 01:50:31.000000000 +0200
+++ poudriere.conf      2016-06-28 02:21:49.699957000 +0200
@@ -9,7 +9,7 @@
 # You need at least 7GB of free space in this pool to have a working
 # poudriere.
 #
-#ZPOOL=tank
+ZPOOL=tank

 ### NO ZFS
 # To not use ZFS, define NO_ZFS=yes
@@ -26,17 +26,16 @@
 #
 # Also note that every protocols supported by fetch(1) are supported here, even
 # file:///
-# Suggested: https://download.FreeBSD.org
-FREEBSD_HOST=_PROTO_://_CHANGE_THIS_
+FREEBSD_HOST=http://ftp.freebsd.org

 # By default the jails have no /etc/resolv.conf, you will need to set
-# RESOLV_CONF to a file on your hosts system that will be copied has
+# REVOLV_CONF to a file on your hosts system that will be copied has
 # /etc/resolv.conf for the jail, except if you don't need it (using an http
 # proxy for example)
 RESOLV_CONF=/etc/resolv.conf

 # The directory where poudriere will store jails and ports
-BASEFS=/usr/local/poudriere
+BASEFS=/opt/poudriere

 # The directory where the jail will store the packages and logs
 # by default a zfs filesystem will be created and set to
@@ -49,8 +48,8 @@ USE_PORTLINT=no

 # When building packages, a memory device can be used to speedup the build.
 # Only one of MFSSIZE or USE_TMPFS is supported. TMPFS is generally faster
-# and will expand to the needed amount of RAM. MFS is a slower since it
-# uses UFS and several abstraction layers.
+# and will expand to the needed amount of RAM. MFS is a bit slower, but is
+# more mature and can have its memory usage capped.

 # If set WRKDIRPREFIX will be mdmfs of the given size (mM or gG)
 #MFSSIZE=4G
@@ -77,11 +76,15 @@ USE_TMPFS=yes
 # This allows to share the distfiles between jails and ports tree
 DISTFILES_CACHE=/usr/ports/distfiles

+# If set the ports or source tree marked to use csup method will use the defined mirror
+# Note: csup is deprecated. Use svn instead.
+#CSUP_HOST=cvsup._CHANGE_THIS_.freebsd.org
+
 # If set the ports tree or source tree marked to use svn will use the defined
-# mirror (default: svn.FreeBSD.org)
+# mirror (default: svn0.us-west.FreeBSD.org)
 # The full mirror list is available here:
 # http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/svn.html#svn-mirrors
-#SVN_HOST=svn.FreeBSD.org
+SVN_HOST=svn0.us-east.FreeBSD.org

 # Automatic OPTION change detection
 # When bulk building packages, compare the options from kept packages to
@@ -89,7 +92,7 @@ DISTFILES_CACHE=/usr/ports/distfiles
 # will be deleted and the port will be rebuilt.
 # Valid options: yes, no, verbose
 # verbose will display the old and new options
-#CHECK_CHANGED_OPTIONS=verbose
+CHECK_CHANGED_OPTIONS=yes

 # Automatic Dependency change detection
 # When bulk building packages, compare the dependencies from kept packages to
@@ -98,16 +101,16 @@ DISTFILES_CACHE=/usr/ports/distfiles
 # as DEFAULT_RUBY_VERSION, PERL_VERSION, WITHOUT_X11 that change dependencies
 # for many ports.
 # Valid options: yes, no
-#CHECK_CHANGED_DEPS=yes
+CHECK_CHANGED_DEPS=yes


 # Path to the RSA key to sign the PKGNG repo with. See pkg-repo(8)
-#PKG_REPO_SIGNING_KEY=/etc/ssl/keys/repo.key
+PKG_REPO_SIGNING_KEY=/usr/local/etc/ssl/poudriere/pkg.bsdserwis.com.key


 # ccache support. Supply the path to your ccache cache directory.
 # It will be mounted into the jail and be shared among all jails.
-#CCACHE_DIR=/var/cache/ccache
+CCACHE_DIR=/var/cache/ccache
 #

 # parallel build support.
@@ -117,11 +120,11 @@ DISTFILES_CACHE=/usr/ports/distfiles
 # by specifying the -J flag to bulk/testport.
 #
 # Example to define PARALLEL_JOBS to one single job
-# PARALLEL_JOBS=1
+PARALLEL_JOBS=5

 # How many jobs should be used for preparing the build? These tend to
 # be more IO bound and may be worth tweaking. Default: Same as PARALLEL_JOBS
-# PREPARE_PARALLEL_JOBS=1
+PREPARE_PARALLEL_JOBS=1


 # If set, failed builds will save the WRKDIR to ${POUDRIERE_DATA}/wrkdirs
@@ -129,7 +132,7 @@ DISTFILES_CACHE=/usr/ports/distfiles

 # Choose the default format for the workdir packing: could be tar,tgz,tbz,txz
 # default is tbz
-# WRKDIR_ARCHIVE_FORMAT=tbz
+WRKDIR_ARCHIVE_FORMAT=tar

 # Disable linux support
 # NOLINUX=yes
@@ -160,21 +163,21 @@ DISTFILES_CACHE=/usr/ports/distfiles

 # Timestamp every line of build logs
 # Default: no
-#TIMESTAMP_LOGS=no
+TIMESTAMP_LOGS=yes

 # URL where your POUDRIERE_DATA/logs are hosted
 # This will be used for giving URL hints to the HTML output when
 # scheduling and starting builds
-#URL_BASE=http://yourdomain.com/poudriere/
+URL_BASE=https://rtm.bsdserwis.com/poudriere/


 # This defines the max time (in seconds) that a command may run for a build
 # before it is killed for taking too long. Default: 86400
-#MAX_EXECUTION_TIME=86400
+MAX_EXECUTION_TIME=86400

 # This defines the time (in seconds) before a command is considered to
 # be in a runaway state for having no output on stdout. Default: 7200
-#NOHANG_TIME=7200
+NOHANG_TIME=7200


 # The repository is updated atomically if set yes. This leaves the
@@ -233,11 +236,11 @@ DISTFILES_CACHE=/usr/ports/distfiles

 # Define format for build duration times
 # Default: %H:%M:%S
-#DURATION_FORMAT="%H:%M:%S"
+DURATION_FORMAT="%H:%M:%S"

 # Use colors when in a TTY
 # Default: yes
-#USE_COLORS=yes
+USE_COLORS=yes

 # Only build what is requested. Do not rebuild build deps if nothing requested
 # depends on them. This can create an inconsistent repository if you often

Korzystanie z poudriere

ports

Utworzenie drzewa

poudriere ports -c

aktualizacja drzewa

Trzeba dopisać do zadania w crontabie:

poudriere ports -u

jails (ale dla poudriere, nie globalny dla systemu)

Utworzenie "jail" dla wybranego OS

poudriere jail -c -j 93x64 -v 9.3-RELEASE -a amd64

Aktualizacja wybranego OS

poudriere jail -u -j 91x64

Utworzenie "jail" na postawie źródeł serwera

poudriere jail -c -a amd64 -j 10x64 -m src=/usr/src -f 10x64 -v 10.3-STABLE

# w przypadku problemów z utworzeniem drzewa katalogów
zfs create sys/data/pkg/jails/10x64
poudriere jail -c -a amd64 -j 10x64 -m src=/usr/src -v 10.3-STABLE

Aktualizacja OS na podstawie źródeł

poudriere jail -u -j 10x64

/!\ Aktualizacja nie podmienia pliku konfiguracyjnego login.conf dla danego jail. Dlatego też konieczne jest aktualizacja pliku "ręcznie", aby budowane pakiety były poprawnie oznaczone

default:\
        :passwd_format=sha512:\
        :copyright=/etc/COPYRIGHT:\
        :welcome=/etc/motd:\
        :setenv=MAIL=/var/mail/$,BLOCKSIZE=K,UNAME_r=10.3-STABLE,UNAME_v=FreeBSD 10.3-STABLE,OSVERSION=1003503:\
[...]

Dodatkowo może być konieczna modyfikacja pliku konfiguracyjnego samego poudriere:

echo "10.3-STABLE" > /usr/local/etc/poudriere.d/jails/10x64/version

Utworzenie odpowiedniego make.conf dla danego jaila

vi /usr/local/etc/poudriere.d/93x64-make.conf

Trzeba utworzyć na podstawie istniejącego w systemie pliku (a właściwie plików)

CPUTYPE?=       nocona

MASTER_SITE_BACKUP?=    \
        http://ftp.bsdserwis.com/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/ \
        http://distcache.ath.pl/${DIST_SUBDIR}/ \
        http://distcache.FreeBSD.org/ports-distfiles/${DIST_SUBDIR}/

# --- domy/slne wersje dla wybranych aplikacji ----------------------------
#
DEFAULT_VERSIONS+=              apache=2.2
DEFAULT_VERSIONS+=              ruby=2.1
DEFAULT_VERSIONS+=              mysql=5.5
DEFAULT_VERSIONS+=              pgsql=9.2
DEFAULT_VERSIONS+=              perl=5.20

# --- opcje globalne dla wszystkich ports ---------------------------------
#
OPTIONS_UNSET+=                 X11

# --- opcje dla poszczeg/olnych ports -------------------------------------
#
security_apg_SET=               CRACKLIB
graphics_ImageMagick-nox11_UNSET=MODULES

# --- u/zycie pkgng -------------------------------------------------------
#
WITH_PKGNG=                     yes
NO_WARNING_PKG_INSTALL_EOL=     yes

# --- ustawienia dotycz/ace wydruk/ow (np. teTeX) -------------------------
#
PAPERSIZE=              a4
A4=                     yes

SVN_UPDATE=             yes
SVN=                    /usr/local/bin/svn

WANT_MYSQL_VER=         55
WITH_MYSQL_VER=         55
WITH_OPENSSL_PORT=      yes
WITH_OPENLDAP_VER=      24
WANT_OPENLDAP_VER=      24
WITH_BDB_VER=           5
WITH_SENDMAIL_BASE=     yes
X11BASE=                ${LOCALBASE}

# This setting to build kernel without -Werror:
WERROR=

# --- uz/ycie CLANG zamiast GCC -----------------------------------------------
#
CC=             clang
CXX=            clang++
CPP=            clang-cpp

Utworzenie listy pakietów do budowania

vi /usr/local/etc/poudriere.d/93x64.pkglist

Która to może powstać na podstawie zainstalowanych pakietów:

pkg info -o -aq | sort -d

i w wyniku powstanie plik:

ports-mgmt/dialog4ports
databases/rrdtool
databases/ruby-bdb
databases/sqlite3
devel/apr1
devel/autoconf
devel/autoconf-wrapper
devel/automake
devel/automake-wrapper
devel/bison
dns/bind-tools
dns/idnkit
dns/ldns
dns/libidn
dns/unbound
editors/vim
ftp/curl
ftp/ncftp3
ftp/wget
graphics/cairo
graphics/graphite2
graphics/png
lang/ocaml
lang/perl5.20
lang/python2
lang/python27
lang/ruby21
misc/help2man
dns/nsd
lang/perl5.20
mail/postfix
mail/ssmtp
net/liboping
net-mgmt/collectd5
net-mgmt/ipcalc
net-mgmt/net-snmp
net/mtr
net/netcat
net/openntpd
net/trafshow
net/unison
net-mgmt/collectd5
security/apg
security/ca_root_nss
security/clamav
security/cracklib
security/ipfmeta
security/libgcrypt
security/libgpg-error
security/libssh2
security/nmap
security/openssh-portable
security/openssl
security/sudo
security/xinetd
shells/bash
sysutils/afio
sysutils/daemontools
sysutils/dmidecode
sysutils/ezjail
sysutils/freebsd-snapshot
sysutils/lsof
sysutils/moreutils
sysutils/screen
sysutils/smartmontools
textproc/expat2
textproc/fex
www/apache22
www/nginx

Nie należy się martwić o zależności - zostaną odpowiednio uwzględnione. Tak więc lista może być o wiele krótsza - zawierać pakiety naprawdę niezbędne.

Wygenerowanie opcji dla każdego z budowanych pakietów

Dla pojedynczego pakietu:

poudriere options security/apg

Albo dla całej listy:

poudriere options -cf /usr/local/etc/poudriere.d/93x64.pkglist

Budowanie pakietów

poudriere bulk -f /usr/local/etc/poudriere.d/93x64.pkglist -j 93x64

Utworzenie własnego repozytorium

Wygenerowanie certyfikatu dla aktualizacji pakietów

mkdir -p /usr/local/etc/pki/poudriere
/usr/local/bin/openssl genrsa -out /usr/local/etc/pki/poudriere/poudriere.key 4096
/usr/local/bin/openssl rsa -in /usr/local/etc/pki/poudriere/poudriere.key -pubout -out /usr/local/etc/pki/poudriere/poudriere.crt

Konfiguracja witryny webowej z repozytorium

Można skorzystać z tego przepisu w celu uruchomienia nginx. W przypadku konfiguracji apache wygląda to następująco:

<Directory /opt/poudriere/data/packages>
    Options Indexes FollowSymLinks
    Order allow,deny
    Allow from all
</Directory>

<VirtualHost 188.165.252.223:80 2001:41d0:2:c7df::1:80>
    ServerName pkg.bsdserwis.com
    DocumentRoot /opt/poudriere/data/packages
    ErrorLog /var/log/httpd/pkg.bsdserwis.com/error.log
    CustomLog /var/log/httpd/pkg.bsdserwis.com/access.log combined
</VirtualHost>

Konfiguracja klienta

Przegranie klucza

Po pierwsze trzeba przegrać poudriere.crt na serwery, które mają korzystać z tego repozytorium:

mkdir -p /usr/local/etc/ssl/certs/
fetch http://ca.bsdserwis.com/pkg.bsdserwis.com.crt -o /usr/local/etc/ssl/certs/pkg.bsdserwis.com.crt

Konfiguracja repozytorium

mkdir -p /usr/local/etc/pkg/repos

vi /usr/local/etc/pkg/repos/pkg.bsdserwis.com.conf

Zaś zawartość tego pliku jest następująca:

pkg.bsdserwis.com: {
  url: "http://pkg.bsdserwis.com/10x64-default",
  mirror_type: "http",
  signature_type: "pubkey",
  pubkey: "/usr/local/etc/ssl/certs/pkg.bsdserwis.com.crt",
  enabled: yes
}

Dodatkowo można wyłączyć repozytorium globalne:

echo "FreeBSD: { enabled: no }" > /usr/local/etc/pkg/repos/FreeBSD.conf

Aktualizacja ustawień pkg

Już pozostaje tylko wykonać polecenie:

# poniższą linijkę warto dopisać do zadania /etc/daily.local
#
pkg update -q && pkg version -vRL=

Instalowanie wybranych pakietów

Co warto zainstalować w środowisku jail to już jest opisane w instrukcji uruchamiania środowiska jail.

Alternatywny konfig dla pourdiere na serwerze HQ

--- poudriere.conf.sample       2015-05-30 13:39:31.689236000 +0200
+++ poudriere.conf      2015-03-12 11:58:24.910000627 +0100
@@ -9,7 +9,7 @@
 # You need at least 7GB of free space in this pool to have a working
 # poudriere.
 #
-#ZPOOL=tank
+ZPOOL=tank

 ### NO ZFS
 # To not use ZFS, define NO_ZFS=yes
@@ -26,16 +26,16 @@
 #
 # Also note that every protocols supported by fetch(1) are supported here, even
 # file:///
-FREEBSD_HOST=_PROTO_://_CHANGE_THIS_
+FREEBSD_HOST=ftp://ftp.freebsd.org

 # By default the jails have no /etc/resolv.conf, you will need to set
-# RESOLV_CONF to a file on your hosts system that will be copied has
+# REVOLV_CONF to a file on your hosts system that will be copied has
 # /etc/resolv.conf for the jail, except if you don't need it (using an http
 # proxy for example)
 RESOLV_CONF=/etc/resolv.conf

 # The directory where poudriere will store jails and ports
-BASEFS=/usr/local/poudriere
+BASEFS=/opt/poudriere

 # The directory where the jail will store the packages and logs
 # by default a zfs filesystem will be created and set to
@@ -84,7 +84,7 @@
 # mirror (default: svn0.us-west.FreeBSD.org)
 # The full mirror list is available here:
 # http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/svn.html#svn-mirrors
-#SVN_HOST=svn0.us-west.FreeBSD.org
+SVN_HOST=svn0.us-east.FreeBSD.org

 # Automatic OPTION change detection
 # When bulk building packages, compare the options from kept packages to
@@ -92,7 +92,7 @@
 # will be deleted and the port will be rebuilt.
 # Valid options: yes, no, verbose
 # verbose will display the old and new options
-#CHECK_CHANGED_OPTIONS=verbose
+CHECK_CHANGED_OPTIONS=yes

 # Automatic Dependency change detection
 # When bulk building packages, compare the dependencies from kept packages to
@@ -101,7 +101,7 @@
 # as DEFAULT_RUBY_VERSION, PERL_VERSION, WITHOUT_X11 that change dependencies
 # for many ports.
 # Valid options: yes, no
-#CHECK_CHANGED_DEPS=yes
+CHECK_CHANGED_DEPS=yes


 # Path to the RSA key to sign the PKGNG repo with. See pkg-repo(8)
@@ -110,7 +110,7 @@

 # ccache support. Supply the path to your ccache cache directory.
 # It will be mounted into the jail and be shared among all jails.
-#CCACHE_DIR=/var/cache/ccache
+CCACHE_DIR=/var/cache/ccache
 #

 # parallel build support.
@@ -120,7 +120,7 @@
 # by specifying the -J flag to bulk/testport.
 #
 # Example to define PARALLEL_JOBS to one single job
-# PARALLEL_JOBS=1
+#PARALLEL_JOBS=1

 # How many jobs should be used for preparing the build? These tend to
 # be more IO bound and may be worth tweaking. Default: Same as PARALLEL_JOBS
@@ -132,7 +132,7 @@

 # Choose the default format for the workdir packing: could be tar,tgz,tbz,txz
 # default is tbz
-# WRKDIR_ARCHIVE_FORMAT=tbz
+WRKDIR_ARCHIVE_FORMAT=tar

 # Disable linux support
 # NOLINUX=yes
@@ -163,21 +163,21 @@

 # Timestamp every line of build logs
 # Default: no
-#TIMESTAMP_LOGS=no
+TIMESTAMP_LOGS=yes

 # URL where your POUDRIERE_DATA/logs are hosted
 # This will be used for giving URL hints to the HTML output when
 # scheduling and starting builds
-#URL_BASE=http://yourdomain.com/poudriere/
+URL_BASE=http://rtm.bsdserwis.com/poudriere/


 # This defines the max time (in seconds) that a command may run for a build
 # before it is killed for taking too long. Default: 86400
-#MAX_EXECUTION_TIME=86400
+MAX_EXECUTION_TIME=86400

 # This defines the time (in seconds) before a command is considered to
 # be in a runaway state for having no output on stdout. Default: 7200
-#NOHANG_TIME=7200
+NOHANG_TIME=7200


 # The repository is updated atomically if set yes. This leaves the
@@ -236,11 +236,11 @@

 # Define format for build duration times
 # Default: %H:%M:%S
-#DURATION_FORMAT="%H:%M:%S"
+DURATION_FORMAT="%H:%M:%S"

 # Use colors when in a TTY
 # Default: yes
-#USE_COLORS=yes
+USE_COLORS=yes

 # Only build what is requested. Do not rebuild build deps if nothing requested
 # depends on them. This can create an inconsistent repository if you often

Jak poprawić zawartość jail dla poudriere

Zgodnie z dokumentacją poudriere montując jaila korzysta ze snapshota o nazwie clean dla danego jaila. Może być w tym pomocne polecenie (skrypt) snapshot:

snapshot list | grep poudriere
/opt/poudriere/jails/93amd64    777MB    0.0%      0KB    0.0%  clean
/opt/poudriere/jails/a1amd64    881MB    0.1%    140KB    0.0%  clean
/opt/poudriere/jails/10x64    704MB    0.0%      0KB    0.0%  clean

Zatem po modyfikacji jaila (np. ręcznym dograniu bibliotek związanych z libmilter) należy wykonać następujące polecenia:

zfs destroy tank/poudriere/jails/10x64@clean
zfs snapshot tank/poudriere/jails/10x64@clean

Potem już będzie poprawnie działać poudriere bulk.

Źródła w sieci internet


{i} (c) 2004 - 2026 BSD Serwis Krzysztof Stryjek. W przypadku błędów, poprawek proszę kontaktować się z administratorem wiki.


  1. Otwiera się w nowym oknie/nowej karcie przeglądarki. (1 2 3 4)

PoudriereBinaryPkg (ostatnio edytowane 2019-02-09 20:03:45 przez wtps0n)