|
Rozmiar: 16053
Komentarz: * dodanie konfiguracji repozytorium; inne poprawki dopieszczające opis
|
Rozmiar: 30656
Komentarz: + partycja jails dla pkg/poudriere wraz z minimalnymi uprawnieniami
|
| Usunięcia zostały oznaczone w ten sposób. | Dodatki zostały oznaczone w ten sposób. |
| Linia 7: | Linia 7: |
| Ten przepis dotyczy [[UruchomienieJails|uruchomienia]] własnego jaila z podriere w celu budowania paczek dla pozostałych jail-i. Niemniej niektóre ogólne rzeczy są przydatne również dla serwerów bez jail-i. |
Ten przepis dotyczy [[UruchomienieJails|uruchomienia]] własnego jaila z poudriere w celu budowania paczek dla pozostałych jail-i. Niemniej niektóre ogólne rzeczy są przydatne również dla serwerów bez jail-i. = Konfiguracja poudriere jail inside = == Konfiguracja zfs na potrzeby poudriere w jail == {{{#!highlight bash numbers=off zfs create -o jailed=on -o mountpoint=/usr/jails/pkg.wtp3.local sys/data/u/jails/pkg.wtp3.local zfs create -o jailed=on -o canmount=on -o mountpoint=/pkg sys/data/pkg zfs create -p -o poudriere:type=data -o atime=off -o mountpoint=/pkg/data sys/data/pkg/data zfs create -o exec=on sys/data/pkg/data/.m zfs create -o compression=off sys/data/pkg/data/cache zfs create -o compression=lz4 sys/data/pkg/data/logs zfs create -o compression=off sys/data/pkg/data/packages zfs create -o compression=off sys/data/pkg/data/wrkdirs zfs create -p -o compression=lz4 -o atime=off -o mountpoint=/pkg/ports/default sys/data/pkg/ports/default zfs create -p -o exec=on sys/data/pkg/jails }}} == /etc/fstab == {{{ # --- JAILS --------------------------------------------------------------------------- # sys/data/u/jails/pkg.wtp3.local /usr/jails/pkg.wtp3.local zfs rw,noatime,nfsv4acls 0 0 # --- Dodatki do JAILS ----------------------------------------------------------------- # sys/data/pkg /usr/jails/pkg.wtp3.local/pkg zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/data /usr/jails/pkg.wtp3.local/pkg/data zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/data/.m /usr/jails/pkg.wtp3.local/pkg/data/.m zfs rw,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/data/cache /usr/jails/pkg.wtp3.local/pkg/data/cache zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/data/logs /usr/jails/pkg.wtp3.local/pkg/data/logs zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/data/packages /usr/jails/pkg.wtp3.local/pkg/data/packages zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/data/wrkdirs /usr/jails/pkg.wtp3.local/pkg/data/wrkdirs zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/jails /usr/jails/pkg.wtp3.local/pkg/jails zfs rw,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/ports /usr/jails/pkg.wtp3.local/pkg/ports zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/ports/default /usr/jails/pkg.wtp3.local/pkg/ports/default zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 /usr/src /usr/jails/pkg.wtp3.local/usr/src nullfs ro,late 0 0 /usr/obj /usr/jails/pkg.wtp3.local/usr/obj nullfs ro,late 0 0 }}} Zamontowanie katalogów `/usr/src` oraz `/usr/obj` potrzebne w celu wykonania jaila ze źródeł systemu (własna konfiguracja) {{{#!wiki comment |
| Linia 10: | Linia 50: |
| Pierwsze uruchomienie niestety się nie powiodło. Przeszkadza temu kawałek kodu z pliku `/usr/local/share/poudriere/common.sh` wywołujący funkcję '''injail id'''. Na razie obejście poprzez zakomentowanie tego kawałka kodu. Albo jednak uruchomienie poudriere poza jail. Zważywszy, że próba wykonania pierwszego polecenia "bulk" powoduje problemy. Zresztą trzeba patrzeć na [[https://github.com/freebsd/poudriere/issues/101|komentarz|target="_blank"]] autorów programu. | Pierwsze uruchomienie niestety się nie powiodło. Przeszkadza temu kawałek kodu z pliku `/usr/local/share/poudriere/common.sh` wywołujący funkcję '''injail id'''. Na razie obejście poprzez zakomentowanie tego kawałka kodu. Albo jednak uruchomienie poudriere poza jail. Zważywszy, że próba wykonania pierwszego polecenia "bulk" powoduje problemy. Zresztą trzeba patrzeć na [[https://github.com/freebsd/poudriere/issues/101|komentarz|target="_blank"]]<<FootNote(Otwiera się w nowym oknie/nowej karcie przeglądarki.)>> autorów programu. }}} == Konfiguracja /etc/jail.conf == {{{ pkg_wtp3_local { host.hostname = "pkg.stenda.jails"; path = "/usr/jails/pkg.wtp3.local"; ip4.addr += "10.20.11.32/32"; ip4.addr += "127.0.0.1/32"; allow.raw_sockets = 0; exec.clean; exec.consolelog = "/var/log/jails/pkg.wtp3.local_console.log"; mount += "procfs /usr/jails/pkg.wtp3.local/proc procfs rw 0 0"; allow.set_hostname = 0; persist; children.max=10; allow.mount; allow.mount.tmpfs; allow.mount.devfs; allow.mount.procfs; allow.mount.zfs; allow.mount.nullfs; allow.raw_sockets; allow.socket_af; allow.sysvipc; allow.chflags; enforce_statfs=1; ip6=inherit; ip4=inherit; } }}} /!\ '''WAŻNE''' poudriere wymaga, aby interfejs ''lo0'' posiadał adres ''127.0.0.1''. W przeciwnym przypadku nie ma możliwości uruchomienia budowania paczek. == Utworzenie brakujących katalogów == Poprzez konsolę jaila należy utworzyć brakujące katalogi: {{{#!highlight bash numbers=off mkdir -p /var/cache/ccache /var/cache/distfiles }}} == Załadowanie potrzebnych modułów jądra == Ręcznie w celu pierwszego uruchomienia: {{{#!highlight bash numbers=off kldload tmpfs }}} W pliku `/boot/loader.conf` w celu uruchomienia przy uruchamianiu serwera: {{{#!highlight bash numbers=off # TMPFS na potrzeby poudriere # tmpfs_load="YES" }}} = Instalacja oraz konfiguracja poudriere = |
| Linia 13: | Linia 106: |
| Sprawdzonym sposobem: {{{#!shell numbers=off portupgrade -N pourdriere |
{{{#!highlight bash numbers=off pkg install -y pourdriere ccache ports-mgmt/dialog4ports |
| Linia 19: | Linia 111: |
| {{{#!diff numbers=off --- poudriere.conf.sample 2015-04-11 04:30:18.000000000 +0000 +++ poudriere.conf 2015-05-30 21:01:21.732467588 +0000 @@ -9,14 +9,14 @@ |
=== Wersja dla jail === {{{#!highlight diff numbers=off --- poudriere.conf.sample 2016-08-14 01:59:19.000000000 +0200 +++ poudriere.conf 2016-08-17 23:56:33.541134000 +0200 @@ -9,7 +9,7 @@ |
| Linia 27: | Linia 121: |
| +ZPOOL=sys | +ZPOOL=sys/data |
| Linia 31: | Linia 125: |
| #NO_ZFS=yes # root of the poudriere zfs filesystem, by default /poudriere -# ZROOTFS=/poudriere +ZROOTFS=/data/pkg # the host where to download sets for the jails setup # You can specify here a host or an IP @@ -26,7 +26,7 @@ |
@@ -26,17 +26,16 @@ |
| Linia 43: | Linia 129: |
| -# Suggested: https://download.FreeBSD.org | |
| Linia 47: | Linia 134: |
| # RESOLV_CONF to a file on your hosts system that will be copied has @@ -35,13 +35,13 @@ |
-# RESOLV_CONF to a file on your hosts system that will be copied has +# REVOLV_CONF to a file on your hosts system that will be copied has # /etc/resolv.conf for the jail, except if you don't need it (using an http # proxy for example) |
| Linia 57: | Linia 146: |
| # ${BASEFS}/data # -#POUDRIERE_DATA=${BASEFS}/data +POUDRIERE_DATA=${BASEFS}/data # Use portlint to check ports sanity USE_PORTLINT=no @@ -52,7 +52,7 @@ # more mature and can have its memory usage capped. |
@@ -49,8 +48,8 @@ USE_PORTLINT=no # When building packages, a memory device can be used to speedup the build. # Only one of MFSSIZE or USE_TMPFS is supported. TMPFS is generally faster -# and will expand to the needed amount of RAM. MFS is a slower since it -# uses UFS and several abstraction layers. +# and will expand to the needed amount of RAM. MFS is a bit slower, but is +# more mature and can have its memory usage capped. |
| Linia 68: | Linia 156: |
| -#MFSSIZE=4G +MFSSIZE=2G # Use tmpfs(5) # This can be a space-separated list of options: @@ -62,7 +62,7 @@ # all - Run the entire build in memory, including builder jails. # yes - Only enables tmpfs(5) for wrkdir # EXAMPLE: USE_TMPFS="wrkdir data" -USE_TMPFS=yes +##USE_TMPFS=yes # How much memory to limit tmpfs size to for *each builder* in GiB # (default: none) @@ -70,7 +70,7 @@ |
#MFSSIZE=4G @@ -71,17 +70,21 @@ USE_TMPFS=yes |
| Linia 87: | Linia 162: |
| +MAX_MEMORY=3 | +MAX_MEMORY=2 |
| Linia 91: | Linia 166: |
| @@ -84,7 +84,7 @@ # mirror (default: svn0.us-west.FreeBSD.org) |
-DISTFILES_CACHE=/usr/ports/distfiles +DISTFILES_CACHE=/var/cache/distfiles + +# If set the ports or source tree marked to use csup method will use the defined mirror +# Note: csup is deprecated. Use svn instead. +#CSUP_HOST=cvsup._CHANGE_THIS_.freebsd.org # If set the ports tree or source tree marked to use svn will use the defined -# mirror (default: svn.FreeBSD.org) +# mirror (default: svn0.us-west.FreeBSD.org) |
| Linia 95: | Linia 178: |
| -#SVN_HOST=svn0.us-west.FreeBSD.org | -#SVN_HOST=svn.FreeBSD.org |
| Linia 100: | Linia 183: |
| @@ -92,7 +92,7 @@ | @@ -89,7 +92,7 @@ DISTFILES_CACHE=/usr/ports/distfiles |
| Linia 109: | Linia 192: |
| @@ -101,16 +101,16 @@ | @@ -98,16 +101,16 @@ DISTFILES_CACHE=/usr/ports/distfiles |
| Linia 119: | Linia 202: |
| +PKG_REPO_SIGNING_KEY=/usr/local/etc/pki/poudriere/poudriere.key | +PKG_REPO_SIGNING_KEY=/usr/local/etc/ssl/poudriere/pkg.bsdserwis.com.key |
| Linia 129: | Linia 212: |
| @@ -120,11 +120,11 @@ | @@ -117,11 +120,11 @@ DISTFILES_CACHE=/usr/ports/distfiles |
| Linia 139: | Linia 222: |
| +PREPARE_PARALLEL_JOBS=2 | +PREPARE_PARALLEL_JOBS=1 |
| Linia 143: | Linia 226: |
| @@ -129,10 +132,10 @@ DISTFILES_CACHE=/usr/ports/distfiles # Choose the default format for the workdir packing: could be tar,tgz,tbz,txz # default is tbz -# WRKDIR_ARCHIVE_FORMAT=tbz +WRKDIR_ARCHIVE_FORMAT=tar # Disable linux support -# NOLINUX=yes +NOLINUX=yes # By default poudriere sets FORCE_PACKAGE # To disable it (useful when building public packages): @@ -160,21 +163,21 @@ DISTFILES_CACHE=/usr/ports/distfiles # Timestamp every line of build logs # Default: no -#TIMESTAMP_LOGS=no +TIMESTAMP_LOGS=yes # URL where your POUDRIERE_DATA/logs are hosted # This will be used for giving URL hints to the HTML output when # scheduling and starting builds -#URL_BASE=http://yourdomain.com/poudriere/ +URL_BASE=https://pkg.wtp3.local/poudriere/ # This defines the max time (in seconds) that a command may run for a build # before it is killed for taking too long. Default: 86400 -#MAX_EXECUTION_TIME=86400 +MAX_EXECUTION_TIME=86400 # This defines the time (in seconds) before a command is considered to # be in a runaway state for having no output on stdout. Default: 7200 -#NOHANG_TIME=7200 +NOHANG_TIME=7200 # The repository is updated atomically if set yes. This leaves the @@ -233,11 +236,11 @@ DISTFILES_CACHE=/usr/ports/distfiles # Define format for build duration times # Default: %H:%M:%S -#DURATION_FORMAT="%H:%M:%S" +DURATION_FORMAT="%H:%M:%S" # Use colors when in a TTY # Default: yes -#USE_COLORS=yes +USE_COLORS=yes # Only build what is requested. Do not rebuild build deps if nothing requested # depends on them. This can create an inconsistent repository if you often }}} === Wersja bez jail === {{{#!highlight diff numbers=off --- poudriere.conf.sample 2016-07-01 01:50:31.000000000 +0200 +++ poudriere.conf 2016-06-28 02:21:49.699957000 +0200 @@ -9,7 +9,7 @@ # You need at least 7GB of free space in this pool to have a working # poudriere. # -#ZPOOL=tank +ZPOOL=tank ### NO ZFS # To not use ZFS, define NO_ZFS=yes @@ -26,17 +26,16 @@ # # Also note that every protocols supported by fetch(1) are supported here, even # file:/// -# Suggested: https://download.FreeBSD.org -FREEBSD_HOST=_PROTO_://_CHANGE_THIS_ +FREEBSD_HOST=http://ftp.freebsd.org # By default the jails have no /etc/resolv.conf, you will need to set -# RESOLV_CONF to a file on your hosts system that will be copied has +# REVOLV_CONF to a file on your hosts system that will be copied has # /etc/resolv.conf for the jail, except if you don't need it (using an http # proxy for example) RESOLV_CONF=/etc/resolv.conf # The directory where poudriere will store jails and ports -BASEFS=/usr/local/poudriere +BASEFS=/opt/poudriere # The directory where the jail will store the packages and logs # by default a zfs filesystem will be created and set to @@ -49,8 +48,8 @@ USE_PORTLINT=no # When building packages, a memory device can be used to speedup the build. # Only one of MFSSIZE or USE_TMPFS is supported. TMPFS is generally faster -# and will expand to the needed amount of RAM. MFS is a slower since it -# uses UFS and several abstraction layers. +# and will expand to the needed amount of RAM. MFS is a bit slower, but is +# more mature and can have its memory usage capped. # If set WRKDIRPREFIX will be mdmfs of the given size (mM or gG) #MFSSIZE=4G @@ -77,11 +76,15 @@ USE_TMPFS=yes # This allows to share the distfiles between jails and ports tree DISTFILES_CACHE=/usr/ports/distfiles +# If set the ports or source tree marked to use csup method will use the defined mirror +# Note: csup is deprecated. Use svn instead. +#CSUP_HOST=cvsup._CHANGE_THIS_.freebsd.org + # If set the ports tree or source tree marked to use svn will use the defined -# mirror (default: svn.FreeBSD.org) +# mirror (default: svn0.us-west.FreeBSD.org) # The full mirror list is available here: # http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/svn.html#svn-mirrors -#SVN_HOST=svn.FreeBSD.org +SVN_HOST=svn0.us-east.FreeBSD.org # Automatic OPTION change detection # When bulk building packages, compare the options from kept packages to @@ -89,7 +92,7 @@ DISTFILES_CACHE=/usr/ports/distfiles # will be deleted and the port will be rebuilt. # Valid options: yes, no, verbose # verbose will display the old and new options -#CHECK_CHANGED_OPTIONS=verbose +CHECK_CHANGED_OPTIONS=yes # Automatic Dependency change detection # When bulk building packages, compare the dependencies from kept packages to @@ -98,16 +101,16 @@ DISTFILES_CACHE=/usr/ports/distfiles # as DEFAULT_RUBY_VERSION, PERL_VERSION, WITHOUT_X11 that change dependencies # for many ports. # Valid options: yes, no -#CHECK_CHANGED_DEPS=yes +CHECK_CHANGED_DEPS=yes # Path to the RSA key to sign the PKGNG repo with. See pkg-repo(8) -#PKG_REPO_SIGNING_KEY=/etc/ssl/keys/repo.key +PKG_REPO_SIGNING_KEY=/usr/local/etc/ssl/poudriere/pkg.bsdserwis.com.key # ccache support. Supply the path to your ccache cache directory. # It will be mounted into the jail and be shared among all jails. -#CCACHE_DIR=/var/cache/ccache +CCACHE_DIR=/var/cache/ccache # # parallel build support. @@ -117,11 +120,11 @@ DISTFILES_CACHE=/usr/ports/distfiles # by specifying the -J flag to bulk/testport. # # Example to define PARALLEL_JOBS to one single job -# PARALLEL_JOBS=1 +PARALLEL_JOBS=5 # How many jobs should be used for preparing the build? These tend to # be more IO bound and may be worth tweaking. Default: Same as PARALLEL_JOBS -# PREPARE_PARALLEL_JOBS=1 +PREPARE_PARALLEL_JOBS=1 # If set, failed builds will save the WRKDIR to ${POUDRIERE_DATA}/wrkdirs @@ -129,7 +132,7 @@ DISTFILES_CACHE=/usr/ports/distfiles # Choose the default format for the workdir packing: could be tar,tgz,tbz,txz # default is tbz -# WRKDIR_ARCHIVE_FORMAT=tbz +WRKDIR_ARCHIVE_FORMAT=tar # Disable linux support # NOLINUX=yes @@ -160,21 +163,21 @@ DISTFILES_CACHE=/usr/ports/distfiles # Timestamp every line of build logs # Default: no -#TIMESTAMP_LOGS=no +TIMESTAMP_LOGS=yes # URL where your POUDRIERE_DATA/logs are hosted # This will be used for giving URL hints to the HTML output when # scheduling and starting builds -#URL_BASE=http://yourdomain.com/poudriere/ +URL_BASE=https://rtm.bsdserwis.com/poudriere/ # This defines the max time (in seconds) that a command may run for a build # before it is killed for taking too long. Default: 86400 -#MAX_EXECUTION_TIME=86400 +MAX_EXECUTION_TIME=86400 # This defines the time (in seconds) before a command is considered to # be in a runaway state for having no output on stdout. Default: 7200 -#NOHANG_TIME=7200 +NOHANG_TIME=7200 # The repository is updated atomically if set yes. This leaves the @@ -233,11 +236,11 @@ DISTFILES_CACHE=/usr/ports/distfiles # Define format for build duration times # Default: %H:%M:%S -#DURATION_FORMAT="%H:%M:%S" +DURATION_FORMAT="%H:%M:%S" # Use colors when in a TTY # Default: yes -#USE_COLORS=yes +USE_COLORS=yes # Only build what is requested. Do not rebuild build deps if nothing requested # depends on them. This can create an inconsistent repository if you often |
|
| Linia 150: | Linia 443: |
| {{{#!shell numbers=off | {{{#!highlight bash numbers=off |
| Linia 156: | Linia 449: |
| {{{#!shell numbers=off | {{{#!highlight bash numbers=off |
| Linia 163: | Linia 456: |
| {{{#!shell numbers=off | {{{#!highlight bash numbers=off |
| Linia 168: | Linia 461: |
| {{{#!shell numbers=off | {{{#!highlight bash numbers=off |
| Linia 172: | Linia 465: |
| === Utworzenie "jail" na postawie źródeł serwera === {{{#!highlight bash numbers=off poudriere jail -c -a amd64 -j 10x64 -m src=/usr/src -f 10x64 -v 10.3-STABLE # w przypadku problemów z utworzeniem drzewa katalogów zfs create sys/data/pkg/jails/10x64 poudriere jail -c -a amd64 -j 10x64 -m src=/usr/src -v 10.3-STABLE }}} === Aktualizacja OS na podstawie źródeł === {{{#!highlight bash numbers=off poudriere jail -u -j 10x64 }}} /!\ Aktualizacja nie podmienia pliku konfiguracyjnego `login.conf` dla danego jail. Dlatego też konieczne jest aktualizacja pliku "''ręcznie''", aby budowane pakiety były poprawnie oznaczone {{{ default:\ :passwd_format=sha512:\ :copyright=/etc/COPYRIGHT:\ :welcome=/etc/motd:\ :setenv=MAIL=/var/mail/$,BLOCKSIZE=K,UNAME_r=10.3-STABLE,UNAME_v=FreeBSD 10.3-STABLE,OSVERSION=1003503:\ [...] }}} Dodatkowo może być konieczna modyfikacja pliku konfiguracyjnego samego `poudriere`: {{{#!highlight bash numbers=off echo "10.3-STABLE" > /usr/local/etc/poudriere.d/jails/10x64/version }}} |
|
| Linia 173: | Linia 495: |
| {{{#!shell numbers=off | {{{#!highlight bash numbers=off |
| Linia 178: | Linia 500: |
| {{{#!bsdmake numbers=off | {{{#!highlight bsdmake numbers=off |
| Linia 237: | Linia 559: |
| {{{#!shell numbers=off | {{{#!highlight bash numbers=off |
| Linia 242: | Linia 564: |
| {{{#!shell numbers=off | {{{#!highlight bash numbers=off |
| Linia 279: | Linia 601: |
| mail/ssmtp | |
| Linia 322: | Linia 645: |
| {{{#!shell numbers=off | {{{#!highlight bash numbers=off |
| Linia 327: | Linia 650: |
| {{{#!shell numbers=off | {{{#!highlight bash numbers=off |
| Linia 332: | Linia 655: |
| {{{#!shell numbers=off | {{{#!highlight bash numbers=off |
| Linia 339: | Linia 662: |
| {{{#!shell numbers=off | {{{#!highlight bash numbers=off |
| Linia 347: | Linia 670: |
| {{{ | {{{#!highlight apache numbers=off |
| Linia 364: | Linia 687: |
| Po pierwsze trzeba przegrać poudriere.crt na serwery, które mają korzystać z tego repozytorium. Forma dowolna, aby bezpieczna :) | Po pierwsze trzeba przegrać poudriere.crt na serwery, które mają korzystać z tego repozytorium: {{{#!highlight bash numbers=off mkdir -p /usr/local/etc/ssl/certs/ fetch http://ca.bsdserwis.com/pkg.bsdserwis.com.crt -o /usr/local/etc/ssl/certs/pkg.bsdserwis.com.crt }}} |
| Linia 367: | Linia 694: |
| {{{#!shell numbers=off | {{{#!highlight bash numbers=off |
| Linia 376: | Linia 703: |
| url: "http://pkg.bsdserwis.com/a1amd64-default", | url: "http://pkg.bsdserwis.com/10x64-default", |
| Linia 385: | Linia 712: |
| {{{#!shell numbers=off | {{{#!highlight bash numbers=off |
| Linia 391: | Linia 718: |
| {{{#!shell numbers=off pkg update |
{{{#!highlight bash numbers=off # poniższą linijkę warto dopisać do zadania /etc/daily.local # pkg update -q && pkg version -vRL= |
| Linia 396: | Linia 725: |
| Co warto zainstalować w środowisku jail to już jest opisane w [[UruchomienieJails|instrukcji uruchamiania]] środowiska jail | Co warto zainstalować w środowisku jail to już jest opisane w [[UruchomienieJails|instrukcji uruchamiania]] środowiska jail. |
| Linia 399: | Linia 728: |
| {{{#!diff numbers=off | {{{#!highlight diff numbers=off |
| Linia 527: | Linia 856: |
| = Jak poprawić zawartość jail dla poudriere = Zgodnie z dokumentacją `poudriere` montując jaila korzysta ze snapshota o nazwie ''clean'' dla danego jaila. Może być w tym pomocne polecenie (skrypt) `snapshot`: {{{#!highlight bash numbers=off snapshot list | grep poudriere /opt/poudriere/jails/93amd64 777MB 0.0% 0KB 0.0% clean /opt/poudriere/jails/a1amd64 881MB 0.1% 140KB 0.0% clean /opt/poudriere/jails/10x64 704MB 0.0% 0KB 0.0% clean }}} Zatem po modyfikacji jaila (np. ręcznym dograniu bibliotek związanych z libmilter) należy wykonać następujące polecenia: {{{#!highlight bash numbers=off zfs destroy tank/poudriere/jails/10x64@clean zfs snapshot tank/poudriere/jails/10x64@clean }}} Potem już będzie poprawnie działać `poudriere bulk`. |
|
| Linia 528: | Linia 874: |
| * http://www.neant.ro/2013/03/building-a-package-repository-for-freebsd-with-poudriere-and-pkgng/ * http://www.bsdnow.tv/tutorials/poudriere * http://savagedlight.me/2014/03/09/freebsd-package-builder-with-poudriere/ |
* [[http://www.neant.ro/2013/03/building-a-package-repository-for-freebsd-with-poudriere-and-pkgng/||target=_blank]]<<FootNote(Otwiera się w nowym oknie/nowej karcie przeglądarki.)>> * [[http://www.bsdnow.tv/tutorials/poudriere||target=_blank]]<<FootNote(Otwiera się w nowym oknie/nowej karcie przeglądarki.)>> * [[http://savagedlight.me/2014/03/09/freebsd-package-builder-with-poudriere/||target=_blank]]<<FootNote(Otwiera się w nowym oknie/nowej karcie przeglądarki.)>> |
| Linia 533: | Linia 879: |
| {i} (c) 2004 - 2015 BSD Serwis Krzysztof Stryjek. Wszelkie uwagi proszę zgłaszać do administratora wiki. | {i} <<GetVal(SlownikNewBsd,adm-podpis)>> ---- |
Spis Treści
- Jak korzystać z poudriere
- Konfiguracja poudriere jail inside
- Instalacja oraz konfiguracja poudriere
- Korzystanie z poudriere
- Utworzenie własnego repozytorium
- Alternatywny konfig dla pourdiere na serwerze HQ
- Jak poprawić zawartość jail dla poudriere
- Źródła w sieci internet
Jak korzystać z poudriere
Ten przepis dotyczy uruchomienia własnego jaila z poudriere w celu budowania paczek dla pozostałych jail-i. Niemniej niektóre ogólne rzeczy są przydatne również dla serwerów bez jail-i.
Konfiguracja poudriere jail inside
Konfiguracja zfs na potrzeby poudriere w jail
zfs create -o jailed=on -o mountpoint=/usr/jails/pkg.wtp3.local sys/data/u/jails/pkg.wtp3.local
zfs create -o jailed=on -o canmount=on -o mountpoint=/pkg sys/data/pkg
zfs create -p -o poudriere:type=data -o atime=off -o mountpoint=/pkg/data sys/data/pkg/data
zfs create -o exec=on sys/data/pkg/data/.m
zfs create -o compression=off sys/data/pkg/data/cache
zfs create -o compression=lz4 sys/data/pkg/data/logs
zfs create -o compression=off sys/data/pkg/data/packages
zfs create -o compression=off sys/data/pkg/data/wrkdirs
zfs create -p -o compression=lz4 -o atime=off -o mountpoint=/pkg/ports/default sys/data/pkg/ports/default
zfs create -p -o exec=on sys/data/pkg/jails
/etc/fstab
# --- JAILS --------------------------------------------------------------------------- # sys/data/u/jails/pkg.wtp3.local /usr/jails/pkg.wtp3.local zfs rw,noatime,nfsv4acls 0 0 # --- Dodatki do JAILS ----------------------------------------------------------------- # sys/data/pkg /usr/jails/pkg.wtp3.local/pkg zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/data /usr/jails/pkg.wtp3.local/pkg/data zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/data/.m /usr/jails/pkg.wtp3.local/pkg/data/.m zfs rw,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/data/cache /usr/jails/pkg.wtp3.local/pkg/data/cache zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/data/logs /usr/jails/pkg.wtp3.local/pkg/data/logs zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/data/packages /usr/jails/pkg.wtp3.local/pkg/data/packages zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/data/wrkdirs /usr/jails/pkg.wtp3.local/pkg/data/wrkdirs zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/jails /usr/jails/pkg.wtp3.local/pkg/jails zfs rw,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/ports /usr/jails/pkg.wtp3.local/pkg/ports zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 sys/data/pkg/ports/default /usr/jails/pkg.wtp3.local/pkg/ports/default zfs rw,noexec,nosuid,noatime,nfsv4acls 0 0 /usr/src /usr/jails/pkg.wtp3.local/usr/src nullfs ro,late 0 0 /usr/obj /usr/jails/pkg.wtp3.local/usr/obj nullfs ro,late 0 0
Zamontowanie katalogów /usr/src oraz /usr/obj potrzebne w celu wykonania jaila ze źródeł systemu (własna konfiguracja)
Konfiguracja /etc/jail.conf
pkg_wtp3_local {
host.hostname = "pkg.stenda.jails";
path = "/usr/jails/pkg.wtp3.local";
ip4.addr += "10.20.11.32/32";
ip4.addr += "127.0.0.1/32";
allow.raw_sockets = 0;
exec.clean;
exec.consolelog = "/var/log/jails/pkg.wtp3.local_console.log";
mount += "procfs /usr/jails/pkg.wtp3.local/proc procfs rw 0 0";
allow.set_hostname = 0;
persist;
children.max=10;
allow.mount;
allow.mount.tmpfs;
allow.mount.devfs;
allow.mount.procfs;
allow.mount.zfs;
allow.mount.nullfs;
allow.raw_sockets;
allow.socket_af;
allow.sysvipc;
allow.chflags;
enforce_statfs=1;
ip6=inherit;
ip4=inherit;
}
WAŻNE poudriere wymaga, aby interfejs lo0 posiadał adres 127.0.0.1. W przeciwnym przypadku nie ma możliwości uruchomienia budowania paczek.
Utworzenie brakujących katalogów
Poprzez konsolę jaila należy utworzyć brakujące katalogi:
mkdir -p /var/cache/ccache /var/cache/distfiles
Załadowanie potrzebnych modułów jądra
Ręcznie w celu pierwszego uruchomienia:
kldload tmpfs
W pliku /boot/loader.conf w celu uruchomienia przy uruchamianiu serwera:
# TMPFS na potrzeby poudriere
#
tmpfs_load="YES"
Instalacja oraz konfiguracja poudriere
Zainstalowanie poudriere
pkg install -y pourdriere ccache ports-mgmt/dialog4ports
Plik konfiguracyjny
Wersja dla jail
--- poudriere.conf.sample 2016-08-14 01:59:19.000000000 +0200
+++ poudriere.conf 2016-08-17 23:56:33.541134000 +0200
@@ -9,7 +9,7 @@
# You need at least 7GB of free space in this pool to have a working
# poudriere.
#
-#ZPOOL=tank
+ZPOOL=sys/data
### NO ZFS
# To not use ZFS, define NO_ZFS=yes
@@ -26,17 +26,16 @@
#
# Also note that every protocols supported by fetch(1) are supported here, even
# file:///
-# Suggested: https://download.FreeBSD.org
-FREEBSD_HOST=_PROTO_://_CHANGE_THIS_
+FREEBSD_HOST=http://ftp.freebsd.org
# By default the jails have no /etc/resolv.conf, you will need to set
-# RESOLV_CONF to a file on your hosts system that will be copied has
+# REVOLV_CONF to a file on your hosts system that will be copied has
# /etc/resolv.conf for the jail, except if you don't need it (using an http
# proxy for example)
RESOLV_CONF=/etc/resolv.conf
# The directory where poudriere will store jails and ports
-BASEFS=/usr/local/poudriere
+BASEFS=/pkg
# The directory where the jail will store the packages and logs
# by default a zfs filesystem will be created and set to
@@ -49,8 +48,8 @@ USE_PORTLINT=no
# When building packages, a memory device can be used to speedup the build.
# Only one of MFSSIZE or USE_TMPFS is supported. TMPFS is generally faster
-# and will expand to the needed amount of RAM. MFS is a slower since it
-# uses UFS and several abstraction layers.
+# and will expand to the needed amount of RAM. MFS is a bit slower, but is
+# more mature and can have its memory usage capped.
# If set WRKDIRPREFIX will be mdmfs of the given size (mM or gG)
#MFSSIZE=4G
@@ -71,17 +70,21 @@ USE_TMPFS=yes
# How much memory to limit jail processes to for *each builder*
# in GiB (default: none)
-#MAX_MEMORY=8
+MAX_MEMORY=2
# If set the given directory will be used for the distfiles
# This allows to share the distfiles between jails and ports tree
-DISTFILES_CACHE=/usr/ports/distfiles
+DISTFILES_CACHE=/var/cache/distfiles
+
+# If set the ports or source tree marked to use csup method will use the defined mirror
+# Note: csup is deprecated. Use svn instead.
+#CSUP_HOST=cvsup._CHANGE_THIS_.freebsd.org
# If set the ports tree or source tree marked to use svn will use the defined
-# mirror (default: svn.FreeBSD.org)
+# mirror (default: svn0.us-west.FreeBSD.org)
# The full mirror list is available here:
# http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/svn.html#svn-mirrors
-#SVN_HOST=svn.FreeBSD.org
+SVN_HOST=svn0.us-east.FreeBSD.org
# Automatic OPTION change detection
# When bulk building packages, compare the options from kept packages to
@@ -89,7 +92,7 @@ DISTFILES_CACHE=/usr/ports/distfiles
# will be deleted and the port will be rebuilt.
# Valid options: yes, no, verbose
# verbose will display the old and new options
-#CHECK_CHANGED_OPTIONS=verbose
+CHECK_CHANGED_OPTIONS=yes
# Automatic Dependency change detection
# When bulk building packages, compare the dependencies from kept packages to
@@ -98,16 +101,16 @@ DISTFILES_CACHE=/usr/ports/distfiles
# as DEFAULT_RUBY_VERSION, PERL_VERSION, WITHOUT_X11 that change dependencies
# for many ports.
# Valid options: yes, no
-#CHECK_CHANGED_DEPS=yes
+CHECK_CHANGED_DEPS=yes
# Path to the RSA key to sign the PKGNG repo with. See pkg-repo(8)
-#PKG_REPO_SIGNING_KEY=/etc/ssl/keys/repo.key
+PKG_REPO_SIGNING_KEY=/usr/local/etc/ssl/poudriere/pkg.bsdserwis.com.key
# ccache support. Supply the path to your ccache cache directory.
# It will be mounted into the jail and be shared among all jails.
-#CCACHE_DIR=/var/cache/ccache
+CCACHE_DIR=/var/cache/ccache
#
# parallel build support.
@@ -117,11 +120,11 @@ DISTFILES_CACHE=/usr/ports/distfiles
# by specifying the -J flag to bulk/testport.
#
# Example to define PARALLEL_JOBS to one single job
-# PARALLEL_JOBS=1
+PARALLEL_JOBS=2
# How many jobs should be used for preparing the build? These tend to
# be more IO bound and may be worth tweaking. Default: Same as PARALLEL_JOBS
-# PREPARE_PARALLEL_JOBS=1
+PREPARE_PARALLEL_JOBS=1
# If set, failed builds will save the WRKDIR to ${POUDRIERE_DATA}/wrkdirs
@@ -129,10 +132,10 @@ DISTFILES_CACHE=/usr/ports/distfiles
# Choose the default format for the workdir packing: could be tar,tgz,tbz,txz
# default is tbz
-# WRKDIR_ARCHIVE_FORMAT=tbz
+WRKDIR_ARCHIVE_FORMAT=tar
# Disable linux support
-# NOLINUX=yes
+NOLINUX=yes
# By default poudriere sets FORCE_PACKAGE
# To disable it (useful when building public packages):
@@ -160,21 +163,21 @@ DISTFILES_CACHE=/usr/ports/distfiles
# Timestamp every line of build logs
# Default: no
-#TIMESTAMP_LOGS=no
+TIMESTAMP_LOGS=yes
# URL where your POUDRIERE_DATA/logs are hosted
# This will be used for giving URL hints to the HTML output when
# scheduling and starting builds
-#URL_BASE=http://yourdomain.com/poudriere/
+URL_BASE=https://pkg.wtp3.local/poudriere/
# This defines the max time (in seconds) that a command may run for a build
# before it is killed for taking too long. Default: 86400
-#MAX_EXECUTION_TIME=86400
+MAX_EXECUTION_TIME=86400
# This defines the time (in seconds) before a command is considered to
# be in a runaway state for having no output on stdout. Default: 7200
-#NOHANG_TIME=7200
+NOHANG_TIME=7200
# The repository is updated atomically if set yes. This leaves the
@@ -233,11 +236,11 @@ DISTFILES_CACHE=/usr/ports/distfiles
# Define format for build duration times
# Default: %H:%M:%S
-#DURATION_FORMAT="%H:%M:%S"
+DURATION_FORMAT="%H:%M:%S"
# Use colors when in a TTY
# Default: yes
-#USE_COLORS=yes
+USE_COLORS=yes
# Only build what is requested. Do not rebuild build deps if nothing requested
# depends on them. This can create an inconsistent repository if you often
Wersja bez jail
--- poudriere.conf.sample 2016-07-01 01:50:31.000000000 +0200
+++ poudriere.conf 2016-06-28 02:21:49.699957000 +0200
@@ -9,7 +9,7 @@
# You need at least 7GB of free space in this pool to have a working
# poudriere.
#
-#ZPOOL=tank
+ZPOOL=tank
### NO ZFS
# To not use ZFS, define NO_ZFS=yes
@@ -26,17 +26,16 @@
#
# Also note that every protocols supported by fetch(1) are supported here, even
# file:///
-# Suggested: https://download.FreeBSD.org
-FREEBSD_HOST=_PROTO_://_CHANGE_THIS_
+FREEBSD_HOST=http://ftp.freebsd.org
# By default the jails have no /etc/resolv.conf, you will need to set
-# RESOLV_CONF to a file on your hosts system that will be copied has
+# REVOLV_CONF to a file on your hosts system that will be copied has
# /etc/resolv.conf for the jail, except if you don't need it (using an http
# proxy for example)
RESOLV_CONF=/etc/resolv.conf
# The directory where poudriere will store jails and ports
-BASEFS=/usr/local/poudriere
+BASEFS=/opt/poudriere
# The directory where the jail will store the packages and logs
# by default a zfs filesystem will be created and set to
@@ -49,8 +48,8 @@ USE_PORTLINT=no
# When building packages, a memory device can be used to speedup the build.
# Only one of MFSSIZE or USE_TMPFS is supported. TMPFS is generally faster
-# and will expand to the needed amount of RAM. MFS is a slower since it
-# uses UFS and several abstraction layers.
+# and will expand to the needed amount of RAM. MFS is a bit slower, but is
+# more mature and can have its memory usage capped.
# If set WRKDIRPREFIX will be mdmfs of the given size (mM or gG)
#MFSSIZE=4G
@@ -77,11 +76,15 @@ USE_TMPFS=yes
# This allows to share the distfiles between jails and ports tree
DISTFILES_CACHE=/usr/ports/distfiles
+# If set the ports or source tree marked to use csup method will use the defined mirror
+# Note: csup is deprecated. Use svn instead.
+#CSUP_HOST=cvsup._CHANGE_THIS_.freebsd.org
+
# If set the ports tree or source tree marked to use svn will use the defined
-# mirror (default: svn.FreeBSD.org)
+# mirror (default: svn0.us-west.FreeBSD.org)
# The full mirror list is available here:
# http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/svn.html#svn-mirrors
-#SVN_HOST=svn.FreeBSD.org
+SVN_HOST=svn0.us-east.FreeBSD.org
# Automatic OPTION change detection
# When bulk building packages, compare the options from kept packages to
@@ -89,7 +92,7 @@ DISTFILES_CACHE=/usr/ports/distfiles
# will be deleted and the port will be rebuilt.
# Valid options: yes, no, verbose
# verbose will display the old and new options
-#CHECK_CHANGED_OPTIONS=verbose
+CHECK_CHANGED_OPTIONS=yes
# Automatic Dependency change detection
# When bulk building packages, compare the dependencies from kept packages to
@@ -98,16 +101,16 @@ DISTFILES_CACHE=/usr/ports/distfiles
# as DEFAULT_RUBY_VERSION, PERL_VERSION, WITHOUT_X11 that change dependencies
# for many ports.
# Valid options: yes, no
-#CHECK_CHANGED_DEPS=yes
+CHECK_CHANGED_DEPS=yes
# Path to the RSA key to sign the PKGNG repo with. See pkg-repo(8)
-#PKG_REPO_SIGNING_KEY=/etc/ssl/keys/repo.key
+PKG_REPO_SIGNING_KEY=/usr/local/etc/ssl/poudriere/pkg.bsdserwis.com.key
# ccache support. Supply the path to your ccache cache directory.
# It will be mounted into the jail and be shared among all jails.
-#CCACHE_DIR=/var/cache/ccache
+CCACHE_DIR=/var/cache/ccache
#
# parallel build support.
@@ -117,11 +120,11 @@ DISTFILES_CACHE=/usr/ports/distfiles
# by specifying the -J flag to bulk/testport.
#
# Example to define PARALLEL_JOBS to one single job
-# PARALLEL_JOBS=1
+PARALLEL_JOBS=5
# How many jobs should be used for preparing the build? These tend to
# be more IO bound and may be worth tweaking. Default: Same as PARALLEL_JOBS
-# PREPARE_PARALLEL_JOBS=1
+PREPARE_PARALLEL_JOBS=1
# If set, failed builds will save the WRKDIR to ${POUDRIERE_DATA}/wrkdirs
@@ -129,7 +132,7 @@ DISTFILES_CACHE=/usr/ports/distfiles
# Choose the default format for the workdir packing: could be tar,tgz,tbz,txz
# default is tbz
-# WRKDIR_ARCHIVE_FORMAT=tbz
+WRKDIR_ARCHIVE_FORMAT=tar
# Disable linux support
# NOLINUX=yes
@@ -160,21 +163,21 @@ DISTFILES_CACHE=/usr/ports/distfiles
# Timestamp every line of build logs
# Default: no
-#TIMESTAMP_LOGS=no
+TIMESTAMP_LOGS=yes
# URL where your POUDRIERE_DATA/logs are hosted
# This will be used for giving URL hints to the HTML output when
# scheduling and starting builds
-#URL_BASE=http://yourdomain.com/poudriere/
+URL_BASE=https://rtm.bsdserwis.com/poudriere/
# This defines the max time (in seconds) that a command may run for a build
# before it is killed for taking too long. Default: 86400
-#MAX_EXECUTION_TIME=86400
+MAX_EXECUTION_TIME=86400
# This defines the time (in seconds) before a command is considered to
# be in a runaway state for having no output on stdout. Default: 7200
-#NOHANG_TIME=7200
+NOHANG_TIME=7200
# The repository is updated atomically if set yes. This leaves the
@@ -233,11 +236,11 @@ DISTFILES_CACHE=/usr/ports/distfiles
# Define format for build duration times
# Default: %H:%M:%S
-#DURATION_FORMAT="%H:%M:%S"
+DURATION_FORMAT="%H:%M:%S"
# Use colors when in a TTY
# Default: yes
-#USE_COLORS=yes
+USE_COLORS=yes
# Only build what is requested. Do not rebuild build deps if nothing requested
# depends on them. This can create an inconsistent repository if you often
Korzystanie z poudriere
ports
Utworzenie drzewa
poudriere ports -c
aktualizacja drzewa
Trzeba dopisać do zadania w crontabie:
poudriere ports -u
jails (ale dla poudriere, nie globalny dla systemu)
Utworzenie "jail" dla wybranego OS
poudriere jail -c -j 93x64 -v 9.3-RELEASE -a amd64
Aktualizacja wybranego OS
poudriere jail -u -j 91x64
Utworzenie "jail" na postawie źródeł serwera
poudriere jail -c -a amd64 -j 10x64 -m src=/usr/src -f 10x64 -v 10.3-STABLE
# w przypadku problemów z utworzeniem drzewa katalogów
zfs create sys/data/pkg/jails/10x64
poudriere jail -c -a amd64 -j 10x64 -m src=/usr/src -v 10.3-STABLE
Aktualizacja OS na podstawie źródeł
poudriere jail -u -j 10x64
Aktualizacja nie podmienia pliku konfiguracyjnego login.conf dla danego jail. Dlatego też konieczne jest aktualizacja pliku "ręcznie", aby budowane pakiety były poprawnie oznaczone
default:\
:passwd_format=sha512:\
:copyright=/etc/COPYRIGHT:\
:welcome=/etc/motd:\
:setenv=MAIL=/var/mail/$,BLOCKSIZE=K,UNAME_r=10.3-STABLE,UNAME_v=FreeBSD 10.3-STABLE,OSVERSION=1003503:\
[...]Dodatkowo może być konieczna modyfikacja pliku konfiguracyjnego samego poudriere:
echo "10.3-STABLE" > /usr/local/etc/poudriere.d/jails/10x64/version
Utworzenie odpowiedniego make.conf dla danego jaila
vi /usr/local/etc/poudriere.d/93x64-make.conf
Trzeba utworzyć na podstawie istniejącego w systemie pliku (a właściwie plików)
CPUTYPE?= nocona
MASTER_SITE_BACKUP?= \
http://ftp.bsdserwis.com/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/ \
http://distcache.ath.pl/${DIST_SUBDIR}/ \
http://distcache.FreeBSD.org/ports-distfiles/${DIST_SUBDIR}/
# --- domy/slne wersje dla wybranych aplikacji ----------------------------
#
DEFAULT_VERSIONS+= apache=2.2
DEFAULT_VERSIONS+= ruby=2.1
DEFAULT_VERSIONS+= mysql=5.5
DEFAULT_VERSIONS+= pgsql=9.2
DEFAULT_VERSIONS+= perl=5.20
# --- opcje globalne dla wszystkich ports ---------------------------------
#
OPTIONS_UNSET+= X11
# --- opcje dla poszczeg/olnych ports -------------------------------------
#
security_apg_SET= CRACKLIB
graphics_ImageMagick-nox11_UNSET=MODULES
# --- u/zycie pkgng -------------------------------------------------------
#
WITH_PKGNG= yes
NO_WARNING_PKG_INSTALL_EOL= yes
# --- ustawienia dotycz/ace wydruk/ow (np. teTeX) -------------------------
#
PAPERSIZE= a4
A4= yes
SVN_UPDATE= yes
SVN= /usr/local/bin/svn
WANT_MYSQL_VER= 55
WITH_MYSQL_VER= 55
WITH_OPENSSL_PORT= yes
WITH_OPENLDAP_VER= 24
WANT_OPENLDAP_VER= 24
WITH_BDB_VER= 5
WITH_SENDMAIL_BASE= yes
X11BASE= ${LOCALBASE}
# This setting to build kernel without -Werror:
WERROR=
# --- uz/ycie CLANG zamiast GCC -----------------------------------------------
#
CC= clang
CXX= clang++
CPP= clang-cpp
Utworzenie listy pakietów do budowania
vi /usr/local/etc/poudriere.d/93x64.pkglist
Która to może powstać na podstawie zainstalowanych pakietów:
pkg info -o -aq | sort -d
i w wyniku powstanie plik:
ports-mgmt/dialog4ports databases/rrdtool databases/ruby-bdb databases/sqlite3 devel/apr1 devel/autoconf devel/autoconf-wrapper devel/automake devel/automake-wrapper devel/bison dns/bind-tools dns/idnkit dns/ldns dns/libidn dns/unbound editors/vim ftp/curl ftp/ncftp3 ftp/wget graphics/cairo graphics/graphite2 graphics/png lang/ocaml lang/perl5.20 lang/python2 lang/python27 lang/ruby21 misc/help2man dns/nsd lang/perl5.20 mail/postfix mail/ssmtp net/liboping net-mgmt/collectd5 net-mgmt/ipcalc net-mgmt/net-snmp net/mtr net/netcat net/openntpd net/trafshow net/unison net-mgmt/collectd5 security/apg security/ca_root_nss security/clamav security/cracklib security/ipfmeta security/libgcrypt security/libgpg-error security/libssh2 security/nmap security/openssh-portable security/openssl security/sudo security/xinetd shells/bash sysutils/afio sysutils/daemontools sysutils/dmidecode sysutils/ezjail sysutils/freebsd-snapshot sysutils/lsof sysutils/moreutils sysutils/screen sysutils/smartmontools textproc/expat2 textproc/fex www/apache22 www/nginx
Nie należy się martwić o zależności - zostaną odpowiednio uwzględnione. Tak więc lista może być o wiele krótsza - zawierać pakiety naprawdę niezbędne.
Wygenerowanie opcji dla każdego z budowanych pakietów
Dla pojedynczego pakietu:
poudriere options security/apg
Albo dla całej listy:
poudriere options -cf /usr/local/etc/poudriere.d/93x64.pkglist
Budowanie pakietów
poudriere bulk -f /usr/local/etc/poudriere.d/93x64.pkglist -j 93x64
Utworzenie własnego repozytorium
Wygenerowanie certyfikatu dla aktualizacji pakietów
mkdir -p /usr/local/etc/pki/poudriere
/usr/local/bin/openssl genrsa -out /usr/local/etc/pki/poudriere/poudriere.key 4096
/usr/local/bin/openssl rsa -in /usr/local/etc/pki/poudriere/poudriere.key -pubout -out /usr/local/etc/pki/poudriere/poudriere.crt
Konfiguracja witryny webowej z repozytorium
Można skorzystać z tego przepisu w celu uruchomienia nginx. W przypadku konfiguracji apache wygląda to następująco:
<Directory /opt/poudriere/data/packages>
Options Indexes FollowSymLinks
Order allow,deny
Allow from all
</Directory>
<VirtualHost 188.165.252.223:80 2001:41d0:2:c7df::1:80>
ServerName pkg.bsdserwis.com
DocumentRoot /opt/poudriere/data/packages
ErrorLog /var/log/httpd/pkg.bsdserwis.com/error.log
CustomLog /var/log/httpd/pkg.bsdserwis.com/access.log combined
</VirtualHost>
Konfiguracja klienta
Przegranie klucza
Po pierwsze trzeba przegrać poudriere.crt na serwery, które mają korzystać z tego repozytorium:
mkdir -p /usr/local/etc/ssl/certs/
fetch http://ca.bsdserwis.com/pkg.bsdserwis.com.crt -o /usr/local/etc/ssl/certs/pkg.bsdserwis.com.crt
Konfiguracja repozytorium
mkdir -p /usr/local/etc/pkg/repos
vi /usr/local/etc/pkg/repos/pkg.bsdserwis.com.conf
Zaś zawartość tego pliku jest następująca:
pkg.bsdserwis.com: {
url: "http://pkg.bsdserwis.com/10x64-default",
mirror_type: "http",
signature_type: "pubkey",
pubkey: "/usr/local/etc/ssl/certs/pkg.bsdserwis.com.crt",
enabled: yes
}Dodatkowo można wyłączyć repozytorium globalne:
echo "FreeBSD: { enabled: no }" > /usr/local/etc/pkg/repos/FreeBSD.conf
Aktualizacja ustawień pkg
Już pozostaje tylko wykonać polecenie:
# poniższą linijkę warto dopisać do zadania /etc/daily.local
#
pkg update -q && pkg version -vRL=
Instalowanie wybranych pakietów
Co warto zainstalować w środowisku jail to już jest opisane w instrukcji uruchamiania środowiska jail.
Alternatywny konfig dla pourdiere na serwerze HQ
--- poudriere.conf.sample 2015-05-30 13:39:31.689236000 +0200
+++ poudriere.conf 2015-03-12 11:58:24.910000627 +0100
@@ -9,7 +9,7 @@
# You need at least 7GB of free space in this pool to have a working
# poudriere.
#
-#ZPOOL=tank
+ZPOOL=tank
### NO ZFS
# To not use ZFS, define NO_ZFS=yes
@@ -26,16 +26,16 @@
#
# Also note that every protocols supported by fetch(1) are supported here, even
# file:///
-FREEBSD_HOST=_PROTO_://_CHANGE_THIS_
+FREEBSD_HOST=ftp://ftp.freebsd.org
# By default the jails have no /etc/resolv.conf, you will need to set
-# RESOLV_CONF to a file on your hosts system that will be copied has
+# REVOLV_CONF to a file on your hosts system that will be copied has
# /etc/resolv.conf for the jail, except if you don't need it (using an http
# proxy for example)
RESOLV_CONF=/etc/resolv.conf
# The directory where poudriere will store jails and ports
-BASEFS=/usr/local/poudriere
+BASEFS=/opt/poudriere
# The directory where the jail will store the packages and logs
# by default a zfs filesystem will be created and set to
@@ -84,7 +84,7 @@
# mirror (default: svn0.us-west.FreeBSD.org)
# The full mirror list is available here:
# http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/svn.html#svn-mirrors
-#SVN_HOST=svn0.us-west.FreeBSD.org
+SVN_HOST=svn0.us-east.FreeBSD.org
# Automatic OPTION change detection
# When bulk building packages, compare the options from kept packages to
@@ -92,7 +92,7 @@
# will be deleted and the port will be rebuilt.
# Valid options: yes, no, verbose
# verbose will display the old and new options
-#CHECK_CHANGED_OPTIONS=verbose
+CHECK_CHANGED_OPTIONS=yes
# Automatic Dependency change detection
# When bulk building packages, compare the dependencies from kept packages to
@@ -101,7 +101,7 @@
# as DEFAULT_RUBY_VERSION, PERL_VERSION, WITHOUT_X11 that change dependencies
# for many ports.
# Valid options: yes, no
-#CHECK_CHANGED_DEPS=yes
+CHECK_CHANGED_DEPS=yes
# Path to the RSA key to sign the PKGNG repo with. See pkg-repo(8)
@@ -110,7 +110,7 @@
# ccache support. Supply the path to your ccache cache directory.
# It will be mounted into the jail and be shared among all jails.
-#CCACHE_DIR=/var/cache/ccache
+CCACHE_DIR=/var/cache/ccache
#
# parallel build support.
@@ -120,7 +120,7 @@
# by specifying the -J flag to bulk/testport.
#
# Example to define PARALLEL_JOBS to one single job
-# PARALLEL_JOBS=1
+#PARALLEL_JOBS=1
# How many jobs should be used for preparing the build? These tend to
# be more IO bound and may be worth tweaking. Default: Same as PARALLEL_JOBS
@@ -132,7 +132,7 @@
# Choose the default format for the workdir packing: could be tar,tgz,tbz,txz
# default is tbz
-# WRKDIR_ARCHIVE_FORMAT=tbz
+WRKDIR_ARCHIVE_FORMAT=tar
# Disable linux support
# NOLINUX=yes
@@ -163,21 +163,21 @@
# Timestamp every line of build logs
# Default: no
-#TIMESTAMP_LOGS=no
+TIMESTAMP_LOGS=yes
# URL where your POUDRIERE_DATA/logs are hosted
# This will be used for giving URL hints to the HTML output when
# scheduling and starting builds
-#URL_BASE=http://yourdomain.com/poudriere/
+URL_BASE=http://rtm.bsdserwis.com/poudriere/
# This defines the max time (in seconds) that a command may run for a build
# before it is killed for taking too long. Default: 86400
-#MAX_EXECUTION_TIME=86400
+MAX_EXECUTION_TIME=86400
# This defines the time (in seconds) before a command is considered to
# be in a runaway state for having no output on stdout. Default: 7200
-#NOHANG_TIME=7200
+NOHANG_TIME=7200
# The repository is updated atomically if set yes. This leaves the
@@ -236,11 +236,11 @@
# Define format for build duration times
# Default: %H:%M:%S
-#DURATION_FORMAT="%H:%M:%S"
+DURATION_FORMAT="%H:%M:%S"
# Use colors when in a TTY
# Default: yes
-#USE_COLORS=yes
+USE_COLORS=yes
# Only build what is requested. Do not rebuild build deps if nothing requested
# depends on them. This can create an inconsistent repository if you often
Jak poprawić zawartość jail dla poudriere
Zgodnie z dokumentacją poudriere montując jaila korzysta ze snapshota o nazwie clean dla danego jaila. Może być w tym pomocne polecenie (skrypt) snapshot:
snapshot list | grep poudriere
/opt/poudriere/jails/93amd64 777MB 0.0% 0KB 0.0% clean
/opt/poudriere/jails/a1amd64 881MB 0.1% 140KB 0.0% clean
/opt/poudriere/jails/10x64 704MB 0.0% 0KB 0.0% clean
Zatem po modyfikacji jaila (np. ręcznym dograniu bibliotek związanych z libmilter) należy wykonać następujące polecenia:
zfs destroy tank/poudriere/jails/10x64@clean
zfs snapshot tank/poudriere/jails/10x64@clean
Potem już będzie poprawnie działać poudriere bulk.
Źródła w sieci internet
http://www.neant.ro/2013/03/building-a-package-repository-for-freebsd-with-poudriere-and-pkgng/1
http://savagedlight.me/2014/03/09/freebsd-package-builder-with-poudriere/1
(c) 2004 - 2026 BSD Serwis Krzysztof Stryjek. W przypadku błędów, poprawek proszę kontaktować się z administratorem wiki.
